Data sheet
OpDAT patch cord MTP
®
-F/MTP
®
-F OM5, 12 fibers, lime green
Page 1/4
P/N
151RXTFTF0XXY
2021/11/19
Version: A
Illustrations
Principle diagram
See enlarged drawings at the end of document
Product specification
• patch cord with 12 OM5 fibers, assembled on both sides with MPO/MTP® connectors, lime green housing color
• with MM-Elite® ferrules
• Female connectors (without pins) as standard. Variants with male connectors (with pins) are possible.
• available in assignment variants polarity A or B
• suitable for transmissions of e.g. 100 Gbit/s (depending on transceiver technology)
• Cable with aramid fabric, suitable for indoor applications. Diameter available in Ø 2.0 mm and Ø 3.0 mm, sheath color lime green, UV
stabilized, flame retardant and halogen free.
• Fiber type: Bend insensitive multi mode fiber, G50/125 µm, OM5 (IEC 11801), IEC 60793-2-10 A1a.4, ITU-T G.651.1.
• 100 % tested for insertion loss, return loss and end face geometry
• all patch cords are provided with serial number, barcode and measurement protocol
• all available variants can be created with the MTP® configurator
• MTP® is a registered trademark of US Conec Ltd., USA
Data sheet
OpDAT patch cord MTP
®
-F/MTP
®
-F OM5, 12 fibers, lime green
Page 2/4
P/N
151RXTFTF0XXY
2021/11/19
Version: A
Technical Data
General Data
Fields of application
Industrial Ethernet, Data center
Design patch cord
Transmission technology Fiber optic
Wiring Polarity A or B
Color lime green
Color coding fiber/ wire(s) EIA/TIA 598
Dimensions
Dimension - Interface 1 (L x W x H) 60.4 mm x 12.5 mm x 7.6 mm
Dimension - Interface 1 (L x W x H) 2.378 in. x 0.492 in. x 0.299 in.
Dimension - Interface 2 (L x W x H) 60.4 mm x 12.5 mm x 7.6 mm
Dimension - Interface 2 (L x W x H) 2.378 in. x 0.492 in. x 0.299 in.
Mode type of the fiber Multimode
Fiber class OM5 (ISO/IEC 11801/EN 50173 & IEC 60793-2-10/EN
60793-2-10 A1.a.4)
Cable Type MPO/MTP® cable
Number of fibres each cable/ wire 12
Shape PC (Physical Contact)
Connections/interfaces
Connector technology interface 1 MPO/MTP®
Connector technology interface 2 MPO/MTP®
Optical characteristics
Insertion loss max. 0,35 dB
Return loss min. 35 dB
Mechanical data
Bending radius without load min. 30 mm
Bending radius with load min. 40 mm