Data sheet

Cable connector class F

Page 1/7

P/N

130863-02-E

EAN 4250184159247

2022/03/16

Version: AA

Illustrations

Dimensional drawing

See enlarged drawings at the end of document

Product specification

• cable connector for field assembly Class F

for 8 wire cables

• to connect / extend / repair / relocate copper data cables up to Cat.7

• compliance to Class F

up to 1000 MHz according to ISO/IEC 11801 Ed.2.2:2011-06 in connection with Cat.7

copper cables *1

• GHMT certified to ISO/IEC 11801 Ed.2.2:2011-06 and IEC 61156-5 Ed.2.1:2012-12

• suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT

• compact design: diameter 16.8 mm x length 64 mm

• IP67 protected housing in combination with IP67 appropriate cables *2

• refined zinc die-cast housing

• easy and fast assembly without special tools

• shield connection and strain relief integrated

• easy connection of data cables AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors

(IDC)

• solid copper wire diameter 0.4 to 0.64 mm

• stranded copper wire diameter 0.48 to 0.76 mm

• conductor diameter up to 1.6 mm

• suitable for cables with an overall diameter of 5.0 to 9.7 mm *2

�� fully shielded version according to DIN EN 50173-1

• suitable for applications in the railway industry according to data sheet

• *1 F

(with cable lengths of 20 m and above on the left and right side of the cable connector)

• *2 IPX7 (when combined with cables suitable for IP67 and a cable jacket diameter of 6.2 mm to 9.7 mm)

Data sheet

Cable connector class F

Page 2/7

P/N

130863-02-E

EAN 4250184159247

2022/03/16

Version: AA

Technical Data

General Data

Design cable connector

Shielding shielded

Transmission technology Copper

Color metallike

Dimensions

Dimension (L x W x H) 62 mm x 16.8 mm x 16.8 mm

Dimension (L x W x H) 2.441 in. x 0.661 in. x 0.661 in.

Weight 27 g

Weight 0.0595 lb

Field assembly ability yes

Transmission characteristics

Class (ISO/IEC) FA *1 (with cable lengths of 20 m and above on the left and right

side of the cable connector)

Remote Powering yes

PoE IEEE 802.3af

PoE plus IEEE 802.3at

UPoE yes

HDBaseT yes

Transmission rate up to 10 GBit IEEE 802.3an

Connections/interfaces

Connector technology interface 1 IDC-connection

Connector technology interface 2 IDC-connection

Termination data, solid wire (min. - max.)

Conductor cross section, solid wire AWG 26/1 - AWG 22/1

Conductor cross section, solid wire 0.128 mm² - 0.324 mm²

Conductor diameter, solid wire (bare copper) 0.409 mm - 0.643 mm

Conductor diameter, solid wire (bare copper) 0.016 in. - 0.025 in.