General Description
The MAX40016 is a very wide range current sense amplifier
(CSA) with internal sense element that senses from less
than 300µA to greater than 3A current range. The 4-decade
sensed current functions with 1% (typical) gain error and
offers three, multiplexed programmable output ranges in
order to interface with 12-bit ADCs. Having an integrated
sense element has the extra advantage that the entire
current measuring path can be factory-trimmed, saving the
user from having to calibrate independent sense resistors
and CSAs. The MAX40016 (WLP package) drops a typical
of 60mV at 3A from the voltage input to load output .
The MAX40016's integrated current-sensing element
saves the space and cost of an external high-power,
precision current sense resistor. The MAX40016 is offered
in an ultra-tiny, 1.98mm x 1.31mm, 15-bump wafer-
level package (WLP), further reducing board space. The
MAX40016 is also available in a 4mm x 4mm 16-pin
TQFN package.
The MAX40016 operates with a supply voltage from 2.5V
to 5.5V. The device features a low-power mode in which
the current-sensing element remains on, but the outputs
are turned off to reduce the total supply current below
10µA (max).
The MAX40016 also includes a committed on-board
amplifier with an internal gain of 1.5V/V. The MAX40016
operates over the -40°C to +125°C temperature range.
Applications
Mobile Devices
RF Power Monitoring
Portable Instruments
Ordering Information appears at end of data sheet.
19-100232; Rev 2; 11/18
Benets and Features
Integrated Current Sense Element Saves The Space
and Cost of Expensive Precision Sense Resistors
4-Decade Measurement Range
Maintains Accuracy from < 300µA to > 3A
Withstands Overloads to 4A
Low Voltage Drop Across Sense Element
60mV (Active Mode, 3A Load, WLP Package)
35mV (Low Power Mode, 3A Load, WLP Package)
Three Multiplexed Scaling Resistor Outputs Allow
Full Dynamic Range while Interfaced to 12-bit ADCs
+2.5V to +5.5V Input Supply Voltage Range
Low Power Mode Reduces Supply Current to 10µA
Max
Space-Saving
Tiny 1.98mm x 1.3mm, 15-Bump WLP
4mm x 4mm 16-Pin TQFN
-40°C to +125°C Operating Temperature Range
MAX40016 4-Decade Current Sense Amplier
with Integrated Current Sense Element
EVALUATION KIT AVAILABLE
Click here for production status of specic part numbers.
Simplied Block Diagram
V
DD
LD
ISM
ISL
V
O UT
GND
SEL1
SEL0
160kΩ
5.36kΩ
R
ISM
R
ISL
CURRENT
MI RROR
CONTROL
RANGE
SELECTION
MEASURED
IN PUT 2.5V to 5.5V
AT UP TO 3A
FROM
CONTROLLER
ISH
R
ISH
160Ω
CURRENT
GND S
MAX40016
C
LD
R
O UT
C
O UT
C
IN
www.maximintegrated.com
Maxim Integrated
2
MAX40016 4-Decade Current Sense Amplier
with Integrated Current Sense Element