Shenzhen Anbotek Pengcheng Compliance Laboratory Limited Page 1 of 14

ADD: Floor 1, Building C, Gold Power Industrial Park, Julongshan Grand Industrial Zone, Pingshan District, Shenzhen, Guangdong, China.

TEL: (86)755-26066440 FAX: (86)755-26014772 EMAIL: service@anbotek.com WEB: www.anbotek.com

TEST REPORT

IES LM-80-15

For

Shenzhen Refond Optoelectronic Co., Ltd.

1 to 8th Floor, Building #1, 10th Industrial Zone, Tian Liao Community, Gong Ming Area,

Guang Ming New District, SHENZHEN, CHINA.

Report No.:

SZANL181106007-01-M1

Product Description:

2835

Model No.:

RF-W2HV32DS-FF-N2

Test Initiation Date:

2017-11-09

Test Completion Date:

2018-11-21

Report Issue Date:

2018-12-05

Test Standard:

IES LM-80-15

Test Laboratory:

Shenzhen Anbotek Pengcheng Compliance Laboratory Limited

Tested by

Reviewed by

Dick Xiao

Helen Li

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be

duplicated or use in part without prior written consent from Shenzhen Anbotek Pengcheng Compliance Laboratory

Limited. This report must not be used by the customer to claim product certification, approval, or endorsement by

NVLAP, NIST, or any agency of the Federal Government.

Note: The report (#SZANL181106007-01-M1) replaced the previous report (#SZANL181106007-01).

Shenzhen Refond Optoelectronic Co., Ltd. 
 
Report No: SZANL181106007-01-M1                                                                      LM-80 TEST REPORT 
 
TABLE OF CONTENTS 
 
 
General Information ............................................................................................................................ 3 
1 Description of LED Light Sources ...................................................................................... 3 
2 Product Description for Device under Test (DUT) ....................................................... 4 
3 Standards Used ........................................................................................................................ 5 
4 Test Facility Description ......................................................................................................... 5 
5 Test Equipment List ................................................................................................................. 5 
Summary of Test Result .................................................................................................................... 6 
Test Method ........................................................................................................................................... 7 
1 Photometric and Electrical Measurement ....................................................................... 7 
2 Season the LED from 0 hours to 9000 hours ................................................................ 7 
Data Set 1: 55°C, 60 mA ................................................................................................................... 8 
Data Set 2: 85°C, 60 mA ................................................................................................................. 10 
Data Set 3: 105°C, 60 mA .............................................................................................................. 12 
Product Photo ...................................................................................................................................... 14 