24.03.2022
Bopla Geh��use Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de
Euromas Aluminium / Euromas F05
Enclosure, aluminium, with silicone lid seal
A 122 SIL
Order no.: 01122010
* = Available on request.
Dimensions
Dimensions
220 x 120 x 81 mm
Product drawing
Characteristics
Colour of enclosure group
Grey, similar to RAL 7001
Protection class
IP 66
Enclosure Material
G Al Si 12, PU foamed seal
For details see Technical Information
Scope of delivery
Lid and base, lid screws (V2A), 4 screws for installation/earthing
Note
On the A 198, because of the wall-mounting drill holes inside the
sealed lip, expert sealing of the wall-mounting is necessary to
achieve protection class IP 66.
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Drawing for mechanical processing: 01122010 A-122-SIL-G.dxf (306.6 KB)
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable glands, ...)
Product drawing in PDF format: 01122010 A-122-SIL.pdf (76.3 KB)
24.03.2022
Product drawing in DXF format: 01122010 A-122-SIL.dxf (505.3 KB)
Works Test Certificates
682 WPZ-Euromas-Aluminium DE.pdf (163.7 KB)
682 WPZ-Euromas-Aluminium EN.pdf (143.7 KB)
Product information
Euromas Aluminium F05 GB.pdf (1.8 MB)
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information