24.03.2022
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de
Euromas Aluminium / Euromas F05
Enclosure, aluminium
A 122
Order no.: 01122000
* = Available on request.
Dimensions
Dimensions
220 x 120 x 81 mm
Product drawing
Characteristics
Colour of enclosure group
Grey, similar to RAL 7001
Protection class
IP 66
Enclosure Material
G Al Si 12, PU foamed seal
For details see Technical Information
Scope of delivery
Lid and base, lid screws (V2A), 4 screws for installation/earthing
Note
On the A 198, because of the wall-mounting drill holes inside the
sealed lip, expert sealing of the wall-mounting is necessary to
achieve protection class IP 66.
G = design with transparent lid (PC)
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Drawing for mechanical processing: 01122000 A-122-G.dxf (306.6 KB)
24.03.2022
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable glands, ...)
Product drawing in PDF format: 01122000 A-122.pdf (76.3 KB)
Product drawing in DXF format: 01122000 A-122.dxf (505.3 KB)
Works Test Certificates
682 WPZ-Euromas-Aluminium DE.pdf (163.7 KB)
682 WPZ-Euromas-Aluminium EN.pdf (143.7 KB)
Product information
Euromas Aluminium F05 GB.pdf (1.8 MB)
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Matching accessories
Mast mounting, stainless steel V2A, uncoated
96500122 MH 122
96500220 MH 220
Mounting panels, galvanised sheet steel
21001500 M For A 122-123, P 331
Earthing bars with fitted terminal clamps
21004700 E For A 122-123, P 331
Wall brackets, screw-on at rear
21004300 WL For A 119-198, P 330-355
DIN rails DIN EN 60715 TH 15, galvanised steel
21003310 TS 15 For A 122-123