PN 4720044
September 2015
2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without
notice. All product names are trademarks of
their respective companies.
GPS 430-II
GPS Synchronization Module
Instruction Sheet
Introduction
The GPS 430-II GPS Synchronization Module guarantees that the time
clock uncertainty of the Fluke 430-Series II Power Quality Analyzers does
not exceed ±20 ms for 50 Hz signals according to IEC 61000-4-30. This
performance is necessary to ensure that Class A instruments produce the
same 10 aggregation results when connected to the same signal. The
GPS 430-II can only be used on the Fluke 430-Series II Power Quality
Analyzers.
Note
The GPS system is operated by the government of the United
States, which is solely responsible for its accuracy and
maintenance.
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
3210-PR-TF English Instruction Sheet
Page 2
Symbols
The table below lists the symbols used on the Product and in this
instruction sheet.
Symbol
Description
Risk of Danger. Important information. See Instruction
Sheet.
Conforms to European Union directives.
This product complies with the WEEE Directive
marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product
in domestic household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do
not dispose of this product as unsorted municipal
waste.
Before You Start
��Warning
To prevent possible electric shock, fire, or personal injury,
do not permit the cables or GPS antenna to come in
contact with hazardous electrical conductors. This
Product is not intended to be installed in electrical
cabinets or other locations where hazardous conductors
are exposed.
Your shipment includes:
1x GPS 430-II unit with 2 cables (Figure 1):
- Cable with mini USB connector
- Cable connected to the GPS module
1x Universal Mains-Power Adapter BC430/820 (Figure 2)
1x Instruction Sheet GPS 430-II (this sheet)
1x Instruction Sheet BC430/820