Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
Dimension
Length : 12.5
+ / -
0.3
( 0.492 + / - 0.012 )
Width : 12.5
+ / -
0.3
( 0.492 + / - 0.012 )
Height : 7.5
+ / -
0.35
( 0.295 + / - 0.014 )
Inductance : 220 uH
( test freq at 0.1MHz )
DC Resistance : 0.3 / 0.36
ohm ( typ / max )
Saturation Current : 1.60 A ( max )
Temp. rise Current : 1.10 A ( max )
Saturation current typical : 30% reduction from initial L value.
AEC-Q200 qualified
Temp rise Current typical : Temperature will rise by 40 deg C
2019/4/17
SMD Power Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications
(NS series)
unit : mm
unit : inch
NS12575T221MNV
0
100
200
300
0 600 1200 1800 2400 3000
Inductance [uH]
DC Bias [mA]
DC Bias vs Inductance
10
100
1000
10000
0.1 1 10 100
Inductance [uH]
Frequency [MHz]
Frequency vs Inductance
0
10
20
30
40
50
60
0 400 800 1200 1600 2000
Self-temperature rise [deg]
DC Bias [mA]
DC Bias vs Temperature
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.