Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
Dimension
Length : 12.5
+ / -
0.3
( 0.492 + / - 0.012 )
Width : 12.5
+ / -
0.3
( 0.492 + / - 0.012 )
Height : 7.5
+ / -
0.35
( 0.295 + / - 0.014 )
Inductance : 150 uH
( test freq at 0.1MHz )
DC Resistance : 0.161 /
0.1932
ohm ( typ / max )
Saturation Current : 1.90 A ( max )
Temp. rise Current : 1.51 A ( max )
Saturation current typical : 30% reduction from initial L value.
AEC-Q200 qualified
Temp rise Current typical : Temperature will rise by 40 deg C
2014/12/1
SMD Power Inductors for Industrial / Automotive Comfort and Safety Applicationsī
(NS series)(AEC-Q200 qualified)
unit : mm
unit : inch
NS12575T151MNV
0
50
100
150
200
0 1000 2000 3000 4000 5000
Inductance [uH]
DC Bias [mA]
DC Bias vs Inductance
10
100
1000
10000
0.1 1 10 100 1000
Inductance [uH]
Frequency [MHz]
Frequency vs Inductance
0
10
20
30
40
50
60
0 400 800 1200 1600 2000
Self-temperature rise [deg]
DC Bias [mA]
DC Bias vs Temperature
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
The products are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.