www.moxa.com
1
EDS-2016-ML Series
16-port unmanaged Ethernet switches
Features and Benefits
• 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST
connector)
• QoS supported to process critical data in heavy traffic
• Relay output warning for power failure and port break alarm
• IP30-rated metal housing
• Redundant dual 12/24/48 VDC power inputs
• -40 to 75°C operating temperature range (-T model)
Certifications
Introduction
The EDS-2016-ML Series of industrial Ethernet switches have up to 16 10/100M copper ports and two optical fiber ports with SC/ST connector
type options, which are ideal for applications that require flexible industrial Ethernet connections. Moreover, to provide greater versatility for use
with applications from different industries, the EDS-2016-ML Series also allows users to enable or disable the Quality of Service (QoS) function,
broadcast storm protection, and the port break alarm function with DIP switches on the outer panel.
In addition to its compact size, the EDS-2016-ML Series features 12/24/48 VDC redundant power inputs, DIN-rail mounting, high-level EMI/EMC
capability, and an operating temperature range of -10 to 60°C with -40 to 75°C wide temperature models available. The EDS-2016-ML Series has
also passed a 100% burn-in test to ensure it will function reliably in the field.
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) EDS-2016-ML: 16
EDS-2016-ML-T: 16
EDS-2016-ML-MM-SC: 14
EDS-2016-ML-MM-SC-T: 14
EDS-2016-ML-MM-ST: 14
EDS-2016-ML-MM-ST-T: 14
EDS-2016-ML-SS-SC: 14
EDS-2016-ML-SS-SC-T: 14
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
100BaseFX Ports (multi-mode SC connector) EDS-2016-ML-MM-SC: 2
EDS-2016-ML-MM-SC-T: 2
100BaseFX Ports (multi-mode ST connector) EDS-2016-ML-MM-ST: 2
EDS-2016-ML-MM-ST-T: 2
100BaseFX Ports (single-mode SC connector) EDS-2016-ML-SS-SC: 2
EDS-2016-ML-SS-SC-T: 2
www.moxa.com
2
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEEE 802.1p for Class of Service
Optical Fiber
100BaseFX
Multi-Mode
Single-Mode
(40 km)
Single-Mode
(80 km)
Fiber Cable Type OM1
50/125 µm
G.652 G.652
800 MHz x
km
Typical Distance 4 km 5 km 40 km 80 km
Wavelength
Typical (nm) 1300 1310 1550
TX Range
(nm)
1260 to 1360 1280 to 1340 1530 to 1570
RX Range
(nm)
1100 to 1600 1100 to 1600 1100 to 1600
Optical
Power
TX Range
(dBm)
-10 to -20 0 to -5 0 to -5
RX Range
(dBm)
-3 to -32 -3 to -34 -3 to -34
Link Budget
(dB)
12 29 29
Dispersion
Penalty (dB)
3 1 1
Note: When connecting a single-mode fiber transceiver, we recommend using an
attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link
budget (dB) > dispersion penalty (dB) + total link loss (dB).
DIP Switch Configuration
Ethernet Interface Quality of Service (QoS), Broadcast storm protection, Port break alarm
Input/Output Interface
Alarm Contact Channels Relay output with current carrying capacity of 1 A @ 24 VDC
Switch Properties
MAC Table Size 8 K
Packet Buffer Size 2 Mbits
Processing Type Store and Forward
Power Parameters
Connection 1 removable 6-contact terminal block(s)
Input Current EDS-2016-ML: 0.088 A @ 24 VDC
EDS-2016-ML-MM-SC: 0.149 A @ 24 VDC
EDS-2016-ML-MM-ST: 0.152 A @ 24 VDC
EDS-2016-ML-SS-SC: 0.163 A @ 24 VDC
Input Voltage 12/24/48 VDC, Redundant dual inputs
Operating Voltage 9.6 to 60 VDC