=
EXCELSYS COOLX
®
1000
FANLESS, INTELLIGENT 1000 W MODULAR POWER SUPPLIES
Advanced Energy's CoolX®1000 series, part of our Excelsys product
line, is the world’s only fanless 1000 W modular power supply. Packaged
in a compact 259.5 mm x 164 mm x 40.6 mm (10 in x 6.5 in x 1U)
U-channel design, the CoolX1000 provides up to 1000 W without any
requirement for fan or base plate cooling, eliminating acoustic noise
detrimental to scientific and medical applications, as well as applications
sensitive to vibration or where fan cooling is not available. The CoolX1000
also offers increased flexibility by allowing system designers to monitor
and control power supply performance — essential for staving off process
disruption — using either analog or digital communications (PMBus™).
CX10S CX10M
Power
1000 W 1000 W
Slots
6 6
Cooling
No fan featured
Parameters
259.5 mm x 164 mm x 40.6 mm
(10 in x 6.5 in x 1U)
Certification and Compliance
Medical
IEC60601-1 3rd edition,
IEC60601-1-2 4th edition (EMC)
2 MOPP
Dual fused
Industrial
IEC60950, IEC62368-1
SEMI F47*
Defense/Aero
MIL-STD-810G
AT A GLANCE
PRODUCT HIGHLIGHTS
No Fan Featured
1000 W with 100% natural convection
cooling
No base plate needed
No acoustic noise or vibrations
Reliability
MTBF > 2,900,000 hours
High-input surge protection — 4 kV line
to PE for harsh environments
Reverse energy protection — no
blocking diodes required
24 W standby power
Safety approved to 5000 m altitude
93% efficiency
Five-year warranty
Flexibility
Analog and digital management —
PMBus™ monitoring and control capability
Field-configurable — plug and play
power
Series and parallel outputs — higher
voltages/currents
Mounting options — base/side and
DIN-Rail mounting
TYPICAL APPLICATIONS
Medical
Clinical diagnostic equipment, medical
lasers, dialysis equipment, radiological
imaging, clinical chemistry
Industrial
Test and measurement, industrial
machines, automation equipment,
printing, telecommunications,
audio equipment
Hi Rel
Harsh industrial electronics, radar (naval-
and ground-based), communications, test
and measurement
2 advancedenergy.com
COOLX1000 SERIES
MODULES
CoolX CoolMods
Single Output Modules
(1 Slot)
Vnom (V) Set Point Adjust Range (V) Imax (A) Power (W)
CmA 5 2.5-6.0 21.0 105
CmB
1
12 6.0-15.0
2
15.0 180
CmC 24 15.0-28.0 8.3 200
CmD 48 28.0-58.0
3
4.2 200
High Power Modules (3 Slot)
CmE
4
24 24.0-25.2 25.0 600
CmF
4
48 48.0-50.4 12.5 600
Dual Output Modules (1 Slot)
CmG
5
V1 24 3.0-30.0 3.0 90
V2 24 3.0-30.0 3.0 90
CmH
6
V1 5 3.0-6.0 6.0 36
V2 24 3.0-30.0 3.0 90
Wide Trim Modules (1 Slot)
CmA-W01 5 1.0-6.0 21.0 105
CmB-W01 12 1.0-15.0
2
15.0 180
CmC-W01 24 2.0-28.0 8.3 200
CmD-W01 48 3.0-58.0
3
4.2 200
High Voltage Modules (1 Slot)
CmK
7
200 175-205 0.6 132
* SEMI F47 compliant at input voltages > 180 VAC. Consult Advanced Energy for details.
1
Full dynamic specifications may not be met at full load when output voltage is trimmed by above 13 V.
2
Max trim 14 V when used with high power module
3
Max trim 56 V when used with high power module
4
a) Only one high power module (CmE or CmF) can be used per CoolPac.
b) During load transients starting from 0% load on the High Power modules, other modules in the CoolPac may experience an output voltage
dynamic during the load change. Contact applications support for details or support.
5
For the CmG module, the max combined power of both outputs is 120 W.
6
For the CmH module, the max combined power of both outputs is 100 W.
7
When a CmK module is used in the same pack as a CmE or CmF module, one module slot must remain unpopulated.