Industrial Communication
ZAC51EN01
Part Number
This switch allows simple connecting of up to seven
Industrial Ethernet products. In addition, up to four PNP
sensors and actuators can be connected via two digital
I/O ports.
Switch
Technical Data
Supply Voltage 18...32 V
Power consumption of device max.
0,3 A
Power consumption of system max.
0,3 A
Max. Switching Current Switching Outputs
0,6 A
max. total current of the digital I/O ports
1 A
Switching Output Voltage Drop
< 2,5 V
Temperature Range
-25...60 °C
Digital I/O ports short circuit protected
yes
Digital I/O ports overload protected
yes
Digital I/O ports reverse polarity protected
yes
Number of digital I/O ports
2
Baud Rate
10/100 Mbit/s
Transmission Mode
Full/Half Duplex
Switch Mode
Store & Forward
VLAN Prioritization
yes
Auto-Crossover
yes
Auto-Negotiating
yes
Auto-Polarity
yes
Interface
EtherNet/IPâ„¢
Protection Class
III
Electrical Data
Material Aluminum
Weight
1265 g
Degree of Protection
IP67
Type of Connection Power
2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports
7 × M12; 4-pin
Type of connection digital I/O ports
2 × M12; 4-pin
Mechanical Data
yes
Web server
EtherNet/IPâ„¢
Connection Table No.
54
Suitable Connection Equipment No.
78
2 digital I/O ports
7 Industrial Ethernet ports
High protection class IP67
Rugged aluminium housing
Complementary Products
Locking Screw for 7/8" Z0028
Locking Screw for M12 Z0027
All dimensions in mm (1 mm = 0.03937 Inch)
Specifications are subject to change without notice