Operating Instructions
SECUTEST SII⏐+
Test Instrument for Measurements per BGV A3 and Operational Safety Regulation
3-349-394-03
2/6.07
2 GMC-I Gossen-Metrawatt GmbH
14
19
20
18
17
23
18
22
21
16
These operating instructions describe an
instrument with firmware version 7.x.
PROBE
RS232 5 4
45678910
11
12
13
14 15
Function
230 V
Menu
Off
VDE 0751
VDE 0701
0702
T. 240
T. 1
Setup
VDE
L
N
SL
3
2
1
SONDE
SECUTEST SII⏐+
!
1
2
3
N
L
Note
Contact problems with exposed conductive parts
when using the standard probe with test tip
In order to assure good contact, surface coatings must
be removed from devices under test with special tools
at a suitable location so that the surface has a metallic
shine.
The tip of the test probe is not suitable for scratching
away paint, because this may impair its coating and/or
mechanical strength.
The brush probe may be more suitable than the test
probe in certain individual cases.
Standard equipment
1 Test instrument SECUTEST SII⏐+
1 Probe cable with test probe,
depending on test instrument equipment
1 Clip-on alligator clip for test probes
3 Clip-on quick-clamp terminals
1 Calibration certificate per DKD
1 Operating instructions
1 Carrying strap
1
CD ROM (demo) PC software PS3 for data management
1 CD ROM (demo) PC software PC.doc-WORD™/
EXCEL™ for the generation of reports and lists as
well as test data management
Features of SECUTEST SII⏐+
• Automatic recognition and acoustic signal to
indicate whether probe is connected to PE.
• direct output of measurement data via RS232 inter-
face („direct print-out“ function)
• Test current ±200 mA DC
• Country-specific mains connection (test socket)
B00: German (M7010-V011)
B01: German + service socket
B03: French/Czech
Test