Pancake
®
Overfloor Steel Raceway is ideal
for open space wiring of workstations and
desk areas in high traffic sites. Both the
1500 and 2600 Series Raceways mount
directly to the floor and provide safe load
bearing strength for normal office use.
Both raceway models offer a full
complement of fittings and device boxes for
power and communication wiring. Pancake
Overfloor Raceway comes unpainted with a
paintable galvanized finish.
WIREMOLD
®
Pancake
®
Overfloor Raceway
F E A T U R E S & B E N E F I T S
Steel Pancake
®
Overfloor Raceway
n Installs in open space areas. Brings power or telephone
and signal wiring to away-from-wall locations.
n Flat profile. Unobtrusive, low-profile appearance.
n Galvanized steel. Assures durability.
n 2600 Series withstands approximately 150 lbs./sq in.
Provides safe load bearing strength for normal office traffic.
n 1500 Series withstands approximately 200 lbs./sq in.
Provides safe load strength for normal office traffic.
n Full line of fittings. Provides a complete and safe
installation.
n Unpainted. Paintable to match decor.
n UL Listed and CSA certified. File E4376 Guide RJBT
fittings. File 41751 Guide RJPR. CSA File 350.
n UL5. Raceway is compliant with UL5 specifications.
Both 1500 and 2600 Series
Overfloor Raceway provide
solutions for bringing power
or communication services
to open space designs.
ED536R4 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold
1500 and 2600 Series Overfloor
Raceway can be installed over floor
coverings to provide either permanent
or temporary access to services.
2
WIRE SIZE O.D.
THHN/THWN inches [mm] 40% FILL
POWER WIRING 14 AWG 0.111 [2.8] 9
12 AWG 0.130 [3.3] 6
10 AWG 0.164 [4.2] 4
1500 Series Overfloor Raceway Wire Fill Capacities for Power
V1517B Adapter Fitting
1528 Utility Box
1585 Combination Connector
1546A Single Receptacle Box
1546B Duplex Receptacle Box
1511 90° Flat Elbow
1517 Internal Elbow
1518 External Elbow
2642D Junction Box
2686FO Transition Feed Fitting
2600 2600 Series Pancake
Overfloor Steel Raceway
2400 2400 Series Raceway
V500 500/700 Series Raceway
— 1/2" Conduit or
Armored Cable
NOTE:Illustration is for
s
howing product
applications only.
1500 Series Overfloor Raceway System Layout
V
1517B
1
500
V
500
1546A
1528
1546B
1
585
C
onduit or
A
rmored Cable
1511
1
517
1
518
2686FO
2400
2600
2642D
1500
1
500
O.D. (Approx. Dia.)
CABLE/WIRE SIZE Inches [mm] 40% FILL
UNSHIELDED 4-pair, 24 AWG, Cat 3 0.190 [4.8] 3
TWISTED PAIR 4-pair, 24 AWG, Cat 5e 0.210 [5.3] 2
4-pair, 24 AWG, Cat 6 0.250 [6.3] 1
4-pair, 24 AWG, Cat 6a* 0.354 [9.0] 0
25-pair, 24 AWG 0.410 [10.4] 0
COAXIAL RG6/U 0.270 [6.9] 1
FIBER ZipCord 0.118 x 0.236 [3 x 6] 3
Round 4 Strand Fiber 0.187 [4.8] 3
Round 6 Strand Fiber 0.256 [6.5] 1
1500 Series Overfloor Raceway Wire Fill Capacities for
Communications
NOTE: For additional information, refer to the Technical Section.
* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed
cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
1500 Series Overfloor Raceway System Wire Fill Capacity Charts