WIREMOLD
®
CableSmart
™
Series Nonmetallic Raceway
FEATURES & BENEFITS
ED1146R9 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold
CableSmart 40N2 Series Raceway is a large
capacity nonmetallic raceway system that offers
separate channels for power and communications
cabling within a single cover.
With its tamper-resistant design, the 40N2
Series Raceway is an ideal solution for schools,
office settings, or any installation where greater
security is a requirement.
n Extremely tamper-resistant. Perfect for school
applications or anywhere additional security is a priority.
n 2" (51mm) bend radius compliant fittings. These fittings
snap onto overlap raceway base and cover for an aesthetic
installation. Fittings are cULus verified for a 2" (51mm) bend
radius and exceed the recommendations of TIA/EIA-569.
They provide cable protection in lay-in and pull-through
cable installations.
n Available prewired. Manufactured to job site lengths,
raceway comes completely prewired, ready to install. Jobs
can be packaged by area, floor, or building and shipped per
job site requirements.
n Electrical device identification for prewired jobs.
Eliminates guesswork and circuit tracking to speed
additions and renovations.
n Pre-punched mounting holes. Faster and easier
installation.
n Ivory and white finish. Blends with any decor. Paintable
using latex paint.
n New transition fitting options. Used to transition
to PN03, PN05 and PN10 Series Latching Raceways.
n Made of PVC material. Lightweight and easy to cut.
n High capacity device box options. 40N2F55 C-Box
allows both power and data devices to be installed in the
power channel, greatly increasing cable fill capacity
for data cabling.
n Corner drop feed. Provides solution for feeding horizontal
runs of raceway.
n Datacom connectivity options. Accepts industry
standard and proprietary devices from a wide range
of manufacturers to provide a seamless and aesthetically
pleasing interface for voice, data, audio, and video
applications at the point of use.
n
UL and cUL Listed component raceways. File E90378
Guide RJTX, Fittings: File E90377 Guide RJYT. Meets Article
388 of NEC and meets Section 12-600 of CEC.
Dual-Channel Nonmetallic Raceway System
40N2 Series Raceway featuring
40N2F31 Device Bracket.
Download this product’s PEP ecopasport
®
environmental product declaration at
www.legrand.us/resources-and-downloads.
This declaration conforms with ISO 14025 and
14040 and is in alignment with EN 15804.
2
40N2F11
40N2F06
40N2F19
40N2F31
40N2F15
40N2B08
40N2F20
40N2F14
PSB1
40N2F05
40N2F17
40N2C08
40N2F31
40N2F21
NOTE: Illustration is for showing product applications only.
40N2 Series Raceway System Layout
40N2 Series Raceway Wire Fill Capacities
NUMBER OF MAX. NUMBER OF
WIRE SIZE O.D. CONDUCTORS CONDUCTORS BOTH
THHN/THWN Inches (mm) Comp. A Comp. B COMPARTMENTS
Power 14 AWG
0.111 (2.8) 20 20 28
Wiring 12 AWG
0.130 (3.3) 18 18 36
With or 10 AWG
0.164 (4.2) 17 17 24
Without 8 AWG
0.216 (5.5) 15 15 20
Devices 6 AWG
0.254 (6.5) 5 5 10
CABLE CATEGORY/ O.D. Section C Section D
TYPE
DESIGNATION
Inches (mm) 40% Fill* 40% Fill*
UNSHIELDED 4-pair, 24 AWG Cat 3 0.190 (4.8) 45 24
TWISTED PAIR 4-pair, 24 AWG Cat 5e 0.210 (5.3) 37 19
4-pair, 24 AWG Cat 6 0.250 (6.3) 26 13
4-pair, 24 AWG Cat 6a** 0.354 (9.0) 13 6
25-pair, 24 AWG 0.410 (10.4) 9 5
COAXIAL RG6/U 0.270 (6.9) 22 11
FIBER ZipCord 0.118 x 0.236 (3 x 6) 103 55
Round 4 Strand 0.187 (4.8) 46 24
Round 6 Strand 0.256 (6.5) 25 13
40N2 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONS
40N2 RACEWAY WIRE FILL CAPACITIES FOR POWER
Section A
3.22 in.
2
(2080mm
2
)
Section B
1.71 in.
2
(1100mm
2
)
Section C
3.22 in.
2
(2080mm
2
)
Section D
1.71 in.
2
(1100mm
2
)
4.0"
(102mm)
2.0"
(51mm)
* 40% cable fill is the maximum designed cable fill based on TIA/EIA 569-A.
** Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed
cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.