Combination Raised Floor/Wood Floor Box –
Provides an Innovative Open Space Solution
861 Series
™
Floor Boxes bring power or communication
services directly to the point-of-use for open space
applications. 861 Series Floor Boxes have been designed for
use in both raised and wood-constructed floors and are
available with a variety of cover options. These boxes will
accept Wiremold flush-style poke-thru cover assemblies
which are available in dedicated power, communication or
pass-through versions, They will also accept 895 and 896
Series Single Service Covers that are available in brass,
brushed aluminum, and nonmetallic materials.
861 Series Floor Boxes are an ideal solution for bringing
power or communication to board rooms, commercial offices
or upscale residences. And all 861 Series Floor Boxes
include TopGuard protection, an industry-leading design that
not only meets but exceeds UL scrub water exclusion
requirements for tile, wood, and carpeted floors.
FEAT U RES & BE N EF I TS
n
Individual slide covers on flush poke-thru-style cover
assemblies. Protects power and communication devices.
Power slide cover snaps back into place when receptacle
is not in use. 861AMDTC Floor Box is the only all-
communications unit available with slide cover protection.
n
Suitable for use in air-handling spaces. In accordance
with Sec. 300-22(C) of the National Electrical Code.
n
Provides flexibility with a single floor box unit. 861QTC
has a 15A quad receptacle that can be wired in either
standard or isolated ground configuration.
n
“Step-on-it” installation. Reduces labor cost by eliminating
the need for a routed opening on carpet and tile
applications or special tools for installation. Allows all
wiring to be completed at floor level.
n
Meets ADA Accessibility Guidelines. The trim flanges for
this product have been designed to meet the ADA
Accessibility Guidelines as it pertains to ADA Standard 4.5
which addresses changes in floor and ground surface
levels. The poke-thru trim flanges are beveled so the slope
is no greater than 1:2 ratio.
n
Reusable and accessible flip top disposable cover plate.
Prevents unit from seating too far into the sub floor. Saves
time and money during installation by allowing wire
connections to be made at the time of installation, prior to
activating the floor box.
n
Supported by one of the most complete lines of
activation covers in the industry. Compatible with 895
and 896 Series Covers that are available in brass, brushed
aluminum, and polycarbonate, as well as a variety of
aesthetically-pleasing flush, poke-thru style cover options
to meet any decor and can accommodate most power or
data requirements.
n
Datacom connectivity option. Accepts industry standard
and proprietary devices from a wide range of manufacturers
to provide a seamless and aesthetically pleasing interface
for voice, data, audio and video applications at the
point-of-use.
n
TopGuard protection. An integral design which keeps out
water, dirt, and debris from the power and communication
compartments. Whenever you see the TopGuard protection
icon applied to any Wiremold product, you will know that
the product meets and exceeds the new UL scrub water
exclusion requirement.
n
UL Listed to U.S. and Canadian safety standards for tile,
terrazzo, and the UL requirements under UL514A and
UL514C for the scrub water exclusion test for carpet
and wood floors.
Protection from
water, dirt,
and debris.
ED786R9 – Updated August 2013 – For latest specs visit www.legrand.us/wiremold
861 Series Floor Box – an ideal solution for power
or communication needs.
WIREMOLD
®
861 Series
™
Floor Box
2
Catalog No./Item Description/Specifications
861FFTCGY Furniture Feed Raised Floor/
861FFTCBK Wood Floor Box Assembly –
861FFTCAL Cover has two 1/2" trade size
8
61FFTCBS conduits and one 3/4" trade size
861FFTCVY threaded conduit opening for
feeding cables and wires through
floor. Flush flanges available in
painted gray (GY), black (BK), ivory
(VY), or brushed metal finishes in
aluminum (AL) and brass (BS).
Die-cast aluminum construction
with three 1/2" trade size
k
nockouts; two on the sides and
one on the bottom, 18 cu. in.
[295 cu. cm] capacity. Requires a
4" [102mm] diameter hole.
861QTCGY Raised Floor/Wood Floor
861QTCBK Box Assembly – Complete with
861QTCAL prewired 15A quad receptacle
861QTCBS can be wired as standard or
861QTCAB isolated ground. Flush cover is
861QTCVY available in painted gray (GY),
black (BK), ivory (VY), or brushed
metal finishes in aluminum (AL)
and brass (BS). Slide covers
match painted flange colors: gray,
black. Aluminum and brass
flanges shipped with black slide
cover. Brass flange also available
with nonmetallic brass color slide
holder (AB). Die-cast aluminum
construction with three 1/2" trade
size knockouts; two on the sides
and one on the bottom, 18 cu. in.
[295 cu. cm] capacity. Requires
a 4" [102mm] diameter hole.
Catalog No./Item Description/Specifications
8
61 Raised Floor/Wood Floor Box –
Die-cast aluminum construction
with three 1/2" trade size
knockouts; two on the sides and
one on the bottom. 18 cu. in. [295
cu. cm] capacity. Requires a 4"
[102mm] diameter hole. Comes
complete with a disposable cover.
Receptacle and activation
s
old separately.
861DB Raised Floor/Wood Floor Box
Assembly – Complete with 20A
duplex receptacle and brass cover
plate. Die-cast aluminum
construction with three 1/2" trade
size knockouts; two on the sides
and one on the bottom. 18 cu. in.
[295 cu. cm] capacity. Requires
a 4" [102mm] diameter hole.
861AMDTCGY Raised Floor/Wood Floor Box
861AMDTCBK Assembly – All communication
861AMDTCAL floor boxes accept up to four UTP
861AMDTCBS connectors. Flush flanges available
861AMDTCAB in painted gray (GY), black (BK),
861AMDTCVY ivory (VY), or brushed metal finishes
in aluminum (AL) and brass (BS).
Slide covers match painted flange
colors: gray, black. Aluminum and
brass flanges shipped with black
slide cover. Brass flange also
available with nonmetallic
brass-color (AB) slide holder.
Die-cast aluminum construction
with three 1/2" trade size
knockouts; two on the sides and
one on the bottom. 18 cu. in.
[295 cu.cm] capacity. Requires a
4" [102mm] diameter hole. Includes
two (2) Wiremold Open System
adapters, two (2) Ortronics
®
TracJack adapters and two (2)
Ortronics
®
Series II adapters.
861 Series Floor Box Ordering Information
3
3/16"
[
81mm]
NOTE: Assembled with
scrub water
gasket. For use
in floors with
tile, wood, or
carpet covering.
NOTE: Assembled with
scrub water
gasket. For use
in floors with
tile, wood, or
carpet covering.
NOTE: Assembled with
scrub water
gasket. For use
in floors with
tile, wood, or
carpet covering.