Configurable 4047 Series Cover Plates Offer Flexibility
for Power & Data Applications
4047 Series Device Covers have been designed to offer
several significant improvements in both design and ease-
of-installation.
4047 Series Device Covers overlap the raceway to hide
uneven cuts while maintaining a low profile and providing a
seamless integration into the raceway. The 4047 Series
Device Covers also feature an easy-to-install, snap-in
bracket with grounding points. The bracket replaces the
straps found in the older 4000 Series Device Brackets and
makes installation a snap! 4047 Series Device Covers also
fit the same footprint as the 4046 and 4048 Covers so they
can be used anywhere these plates are currently in use.
4047 Series Device Covers can also be pre-configured to
meet individual project requirements! Use our handy
configurator to select the right combination of openings and
locations needed. We’re committed to build and ship these
configurable cover plate orders within 3 business days!
n Low Profile with overlap. 4047 Device Covers overlap to
hide uneven seams created when cutting, and provide a
smooth low profile which reduces dust and damage in the
field. 4047 Device Covers can also be secured with two
screws allowing for the use of tamper-proof screws in
locations where they are required.
n Single piece bracket. Brackets are now a single part
eliminating alignment issues caused by using two separate
brackets and significantly reducing installation time.
n Brackets provided with grounding points. An exclusive
feature of the 4047 Series Device Plates is the built-in
grounding points. This allows the installer access to extra
grounding locations without having to order additional parts.
n 11 configurable options. A variety of power and data
options are available allowing configurations with Pass &
Seymour
®
and Ortronics
®
connectivity modular inserts, as
well as, a wide range of other manufacturers’ faceplates
and inserts.
n Prewired receptacle option. An industry-exclusive
feature! Brackets can be pre-loaded with Pass & Seymour
Specification Grade, Heavy Duty, 20 Amp receptacle
assembled to the bracket and including pre-stripped
12" leads.
F E A T U R E S & B E N E F I T S
ED1300R2 – Updated June 2013 – For latest specs visit www.legrand.us/wiremold
WIREMOLD
®
4047 Series Cover Plates
4047 Series Cover Plates are designed
to accept a full range of power and data
receptacles and are available in both
two- and four-gang configurations.
2
4047 Cover Plates Configurator
Two-Gang Plate:
4 0 4 7
X
Y
Y
Four-Gang Plate:
4 0 4 7 - 2
X
Y
Y
Y
Y
2. Choose a
Plate Configuration:
1. For “X”, Choose one of the following options:
4. Finished Part Number:
V Ivory & UL Listed CV Ivory & cULus Listed (Canada only)
G Gray & UL Listed C
G
Gray & cULus Listed (Canada only)
3. For “Y”, Choose any combination of configurations from the options listed below:
1.41" [35.8mm] Diameter,
S
ingle Round Receptacle
D
uplex Receptacle Opening
C
ombination Modular Furniture &
2 Keystone Twist Out
M
ouse Hole Twist Out & Grommet
1
.59" [40mm] Diameter,
Single Round Receptacle
C
M2 Series Open System
Communication Modules andPass &
Seymour Activate 2A Mini Adapter
B
ezel Opening with Bezel
R
ectangular Receptacle
(ex. decorator, GFCI)
O
rtronics Series II 2A Mini Adapter
Bezel Opening with Bezel
Ortronics TracJack 2A Mini Adapter
Bezel Opening with Bezel
P
ass & Seymour 20 Amp Receptacle
p
re-pigtailed with 12" wire leads installed
o
n Bracket
B
lank
3 Keystone Twist Out
1
1
2
2
1234
1
2
3
4
A.
B.
F.
H.
J.
M.
R.
S.
T.
W.
X.
Z.
4 0 4 7
4 0 4 7 - 2
NOTE: For additional colors or configurations, call 1-800-621-0049, option 2.