WIREMOLD

Steel Raceway

FEATURES & BENEFITS

4000

Series Raceway is the work horse of surface

raceway systems. 4000 Series Raceway can be

divided for multi-service applications making it ideal

for applications requiring a large cable capacity and

dual-service requirements. Commercial, institutional,

and industrial applications benefit from the rigid

steel construction and durable ScuffCoat

™

nish of

this raceway. 4000 Series Raceway is also ideal for

municipalities that have code requirements calling

for all steel construction or that prohibit nonmetallic

cable management systems.

The Industry Standard In Two-Piece Steel Raceway

Available Factory Prewired

n New 4075D Series Bridge Fittings. Provides ability to bridge

over existing 4000, 2400, 700, and 500 Series Raceways.

n New 4047 Faceplates. One-piece device bracket with

overlapping cover design that hides bad cuts and unsightly

seams where device plates abut raceway covers.

n New 4047-2 Faceplates. Same great features as the 4047

faceplates, but now available in a double-wide 4-gang version.

n 4047 faceplates available with pre-pigtailed receptacle

installed. 20A heavy duty commercial grade duplex receptacle

with 12" (305mm) pigtailed pre-installed in the device bracket.

Saves time and labor.

n FiberReady 2" (51mm) Fiber Optic Radius ﬁttings. UL and

cUL veried and exceed the recommendations of TIA/EIA

569A. Available as full capacity ttings or inserts to be used for

existing installations.

n Large cross section area. Provides ample space for large

wiring requirements.

n Complete line of ﬁttings. Provides complete wiring solution

and allows for interconnection between raceway systems.

n Gray baked enamel and Ivory ScuffCoat

™

ﬁnish. Durable

ivory Scuffcoat nish makes a scratch resistant surface.

n Feeder or header system. Ideal for overhead, open spaces

and under raised oor applications.

n Pre-cut covers. For mounting devices on various centers

without cutting the covers. Use with 4046, 4047, 4048, 4007,

and 4049 Series device plates.

n 4050 nonmetallic device plates. Overlapping design offers

an aesthetically pleasing way to cover seams. Available in

gray or ivory.

n Base and cover cutters. Manually operated cutters are

lightweight and portable. Cutters offer labor savings for any

size job and maintain a factory clean and square end cut.

n Available prewired. Manufactured to specied job

site lengths and ready to install. Jobs can be

packaged by area, oor, or building and shipped

per job site requirements.

n Simple prewired ordering. Provide us with marked-up

electrical drawings and electrical/communications

specications and shipments can begin within three

to four weeks or less for most jobs.

n Datacom connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

n UL5 and ADA compliant. Raceway and ttings meet

UL5 standards and can be installed in conformance

with ADA requirements.

n UL Listed multioutlet assemblies. File E68073 Guide

PVGT. Fittings: File E121188 Guide RJPR. Meets Article

380 of NEC and meets Section 12-3023 of CEC.

n cULus Listed Surface Metal Raceway System. File

E4376 Guide RJBT. Fittings: File E41751, Guide RJPR.

Meets Article 386 of NEC and meets Section

12-1600 of CEC.

4000 Series Raceway Used in a

training room application.

ED531R28 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold

Now compatible with A/V devices.

Catalog No./Item Description/Speciﬁcations

V4000B-10 Base –

.050" galvanized steel

G4000B-10

Packed ve 10' (3.050m)

lengths per carton. Base has

two 9/32" (7.1mm) diameter

KOs on centers of approximately

18" (457mm) throughout.

V4000C Cover –

.040" (1.0mm) galvanized

G4000C

steel. Packed ten 5' (1.5mm)

lengths per carton.

V4000C075 7.5" (191mm) Pre-Cut Cover –

For

G4000C075

mounting devices on 12" (305mm)

centers with 4007, 4046, 4047,

4048, and 4050 Series plates.

Spacing will be 12 1/4" (311mm)

with 4050.

V4000C135 13.5" (343mm) Pre-Cut Cover – For

G4000C135

mounting devices on 18" (457mm)

centers with 4007, 4046, 4047,

4048, and 4050 Series plates.

Spacing will be 18 1/4" (464mm)

with 4050.

V4000C195 19.5" (496mm) Pre-Cut Cover –

G4000C195

For mounting devices on 24"

(610mm) centers with 4007,

4046, 4047, 4048, and 4050 Series

plates. Spacing will be 24 1/4"

(616mm) with 4050.

Catalog No./Item Description/Speciﬁcations

V4000C315 31.5" (775mm) Pre-Cut Cover –.

G4000C315

For mounting devices on 36"

(915mm) centers with 4007,

4046, 4047, 4048, and 4050 Series

plates.Spacing will be 36 1/4" (mm)

with 4050.

G4000D Divider –

.040" (1.0mm) galvanized

steel. One side painted buff

primer to provide identication

of compartments.* Packed ten 5'

(1.5m) lengths (50' (15.2m)) per

carton.

IWE-S

Spray Paint – Used for touching

GWE-S

up large areas. Contains 12 oz.

of paint.

IWE-P

Touch-Up Paint Pen – Used for

GWE-P

touching up small areas.

Contains 0.3 oz. of paint.

4000 Series Raceway Ordering Information

4 3/4"

(121mm)

1 17/32"

(39mm)

1 3/4"

(44mm)

4 3/4"

(121mm)

4 3/4"

(121mm)

4 3/4"

(121mm)

4 3/4"

(121mm)

4 3/4"

(121mm)

4010DFO

4011

4047BX

4017

4047RF

4047JX

4018FO

5785

500

4018

4050

4015D

4047RH

5507RJ

4010B

4017FO

4075DA

NOTE: Illustration is for showing product applications only.

4000 Series Raceway System Layout

NOTE:

4001DA Divider Clips

are required to hold

divider in place.

NOTE:

Can only be shipped via

ground transportation.