FEATURES
Built-in 5-channel Motor Driver
1~4CH Control Two Stepper Motors or Four
DC Motor, and the 5th Channel Control One
DC Motor or Coil
1CH/2CH & 3CH/4CH are Capable of
Micro-steps Mode to Drive Maximum 256
Resolution Micro-steps
2.4V to 5.5V Operating Voltage
Maximum Continuous Current: 0.7A
VM Under-voltage Lockout (UVLO)
Thermal Shutdown (TSD)
Low-power Sleep Mode
Automatic Fault Recovery
A Small 20-pin QFN Package Type Has Been
Adopted
APPLICATIONS
GENERAL DESCRIPTION
The TMI8150 is an integrated DC motor driver,
applied to low input voltage working system.
The TMI8150 uses serial communication to
control 5 channels of motors, which supports
PTZ motor and IR cut filter change motor.
1~4CH can drive 2 stepper motor of PTZ (X
and Y axis), X-axis and Y-axis are controlled
by orthogonal SPWM and support forward and
reverse rotation. 5CH control IR-cut.
The current consumption can be hold at quite
low level during standby or operation. In
low-power sleep mode, the current is only
16μA.
The package form of TMI8150 is QFN3x3-20,
which conforms to ROHS specifications, and
the frame is 100% lead-free.