Product Specification
Lasermate Group, Inc. LD808E8WK13 R01.1220
LD808E8WK13
High Power 808nm 8000mW Laser Diode in CoS (Chip-on-Submount)
Package
Description
The Lasermate LD808E8WK13 is a high power 808nm, 8000mW Fabry-Perot laser diode in CoS (Chip-on-
Submount) package. The laser diode is suitable as laser light source for many applications.
Features
• 808nm Fabry-Perot cavity semiconductor laser
• Optical output power: 8000mW CW
• High output power
• Package: CoS (Chip-on-Submount)
Specifications (T
C
= 20
o
C)
Item
Parameter
Typ.
Unit
Optical Parameter
Lasing wavelength
808±5
nm
Output power
8
W
Spectral width
≤5
nm
Emitting area width
200
um
Temperature coefficient
0.30
nm/
o
C
Fast axis divergence
<40
deg
Slow axis divergence
<10
deg
Electrical Parameter
Slope efficiency
≥1.0
W/A
Threshold current
≤1.8
A
Operating current
≤10.0
A
Operating voltage
≤2.0
V
Others
Package
CoS (Chip-on-Submount)
-
Operating temperature
15 to 30
o
C
Storage temperature
-40 to +60
o
C
Welding temperature
≤260
o
C
LD808E8WK13 Product Specification 808nm 8000mW FP Laser Diode CoS Package
Lasermate Group, Inc. LD808E8WK13 R01.1220
Typical Characteristics
P-I-V Curve
Spectral Curve
Mechanical Outline (unit: mm)
Additional Notes
• Data in the sheet are based on CoS package testing.
• Do not operate the device above maximum ratings. Doing so may cause unexpected and permanent
damage to the device.
• Take precautions to avoid electrostatic discharge and/or momentary power spikes. A change in the
characteristics of the laser or premature failure may result.
• Proper heat sinking of the device assures stability and lifetime. Always ensure that maximum operating
temperatures are not exceeded.
• Observing visible or invisible laser beams with human eye directly, or indirectly, can cause permanent
damage. Use a camera to observe the laser.
• No laser device should be used in any application or situation where life or property is at risk in the
event of device failure.
• Specifications are subject to change without notice. Ensure that you have the latest specification by
contacting us prior to purchase or use of the product.