Subject to change – Jenny Chen 03.08 - RCS0712-0053
Products: R&S
®
CMU200
Operation Guide for HSUPA Test
Set-up According to 3GPP TS 34.121
Application Note
This operation guide describes how to measure HSUPA test cases according to 3GPP TS 34.121 V8.0 with
R&S
®
CMU200. Setting files according to the test requirements are attached.
Operation Guide for HSUPA Test Setup according to
3GPP TS 34.121
RCS-0712-0053 2 Rohde & Schwarz
Regional Customer Support Centre-Asia Pacific
Contents
1 Overview ................................................................................................. 3
2 General Configuration for a HSUPA Call Setup...................................... 3
3 Transmitter Tests .................................................................................... 8
3.1 General Settings for Transmitter Tests........................................ 8
3.1.1 Test Specific DL Power Settings.......................................... 8
3.1.2 UE Target Power ................................................................. 9
3.1.3 TPC Setting.......................................................................... 9
3.1.4 HSUPA-Specific Signalling Settings .................................... 9
3.1.5 Subtest Settings................................................................. 10
3.2 Maximum Output Power with HS-DPCCH and E-DCH (TC 5.2B)
......................................................................................................... 14
3.3 Spectrum Emission Mask with E-DCH (TC 5.9B)...................... 16
3.4 Adjacent Channel Leakage Power Ratio (ACLR) with E-DCH
(TC 5.10B)........................................................................................ 17
3.5 UE relative Code Domain Power Accuracy for HS-DPCCH and E-
DCH (TC 5.2D) ................................................................................ 18
3.6 Relative Code Domain Error with HS-DPCCH and E-DCH (TC
5.13.2B)............................................................................................ 21
4 Performance Tests................................................................................ 24
4.1 General Settings for Performance Tests ................................... 24
4.2 Detection of E-DCH HARQ ACK Indicator Channel (EHICH).... 28
4.2.1 Single Link Performance – 10ms TTI (TC 10.2.1.1).......... 28
4.2.2 Single Link Performance – 2ms TTI (TC 10.2.1.2)............ 34
4.3 Detection of E-DCH Relative Grant Channel (E-RGCH) ........... 35
4.3.1 Single link performance (10ms TTI) (TC 10.3.1.1) ............ 35
4.3.2 Single link performance 2ms TTI (TC 10.3.1.2)................. 39
4.6 Demodulation of E-DCH Absolute Grant Channel (E-AGCH)
(TC 10.4.1)....................................................................................... 40
5 Literature ............................................................................................... 47
6 Ordering information ............................................................................. 47
1
The R&S logo, Rohde & Schwarz and R&S are registered trademarks of Rohde & Schwarz GmbH & Co.
KG and their subsidiaries.