PS3500 Diagnostic Module

PS3500-DM

Real-time input and output power monitoring

Diagnostics and fault indication

Modular and hot swappable

Configurable alarms

R/S 485 HART communication

Asset management integration - EDDL/DTM

ATEX, IECEx, and cULus approvals for Div 2/Zone 2

PS3500 N+1 Diagonostic Module for use with series PS3500 3 and 6-position backplanes.

Function

Having an advanced warning of a potential power failure could eliminate long hours of downtime and lost revenue. The diagnostic module

continuously monitors the health of the PS3500 power supplies.

As part of the PS3500 power supply system, the diagnostic module monitors the input, internal, and output parameters.

The diagnostic module displays values of various measurement points along with warning and alarm messages for out-of-tolerance values.

Connection

Zone 2/Div. 2

Diag. Bus

(HART)

Alarm relay

- +

Internal Bus

Diagnosis/Alarm

NC C NO

Earth

Slot 5

Slot 3

Slot 1

Slot 5

Slot 3

Slot 1

Earth

Secondary

(24 V DC)

Primary

(Line power)

Technical Data

Interface

Type diagnostic bus: RS 485

Output

Rated voltage U

90...250 V AC, 44 ... 66 Hz; 90 ... 300 V DC

Rated current I

100 mA max

Fault signal Form C Relay

50 V DC @ 0.6 A

30 V DC @ 2 A

Galvanic isolation

Input/Output 4.25 kV DC

Release

date:

2022-02--

08 Date of

Release date: 2022-02-08 Date of issue: 2022-02-08 Filename: 911107_eng.pdf

Germany: +49 621 776 2222Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0002 Singapore: +65 6779 9091

www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com

pa-info@de.pepperl-fuchs.com

Technical Data

Field circuit/control circuit Primay to Diagnostic Module Isolation: 4.25 kVDC

External RS485 to primary isolation: 4.25 kVDC

Internal RS485 to primary isolation: 4.25 kVDC

Secondary to Diagnostic Module: 2.12 kVDC

External RS485 to secondary isolation: 2.12 kVDC

Internal RS485 to secondary isolation: 2.12 kVDC

Indicators/settings

Display elements LCD Status Screen

Diagnostic Module LED

Primary (AC Input) Monitors LED

Secondary (DC Output) Monitors LED

Power Supply Module LED

Directive conformity

Electromagnetic compatibility Refer to DoC for all directives and standards met.

Conformity

Electromagnetic compatibility NE 21:2006

Degree of protection IEC 60529

Shock resistance EN 60068-2-27

Vibration resistance EN 60068-2-6

Ambient conditions

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)

Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Relative humidity < 95 % , non-condensing

Shock resistance 15 g , 11 ms

Vibration resistance 1 g , 58 ... 150 Hz

Mechanical specifications

Connection type motherboard specific

Housing material Powder Coated, 1010 Cold Rolled Steel

Degree of protection IP20

Mass approx. 1.16 kg (2.56 lbs)

Dimensions 134 x 33 x 268 mm (5.3 x 1.3 x 10.6 inch)

Data for application in connection with hazardous areas

Certificate DEMKO 12 ATEX 1103387X

Marking 1 II 3 G Ex ic ec nC IIC T4 Gc

Directive conformity

Directive 2014/34/EU EN IEC 60079-0:2018; EN IEC 60079-7:2015+A12018; EN 60079-11:2012; EN

60079-15:2019

International approvals

UL approval cULus Listed

E230669

E350173

Approved for Class I/Div 2, ABCD

Class I, Zone 2, Grp IIC T4

IECEx approval IECEx UL 13.0082X

Ex ic ec nC IIC T4 Gc

General information

Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and

instructions have to be observed where applicable. For information see www.pepperl-