Shenzhen Orient Components Co ., Ltd
Copyright© 2020 Orient .All rights Reserved
1
.
Features
(1) Current transfer ratio(CTR) : MIN. 50% at I
F
= 5mA, V
CE
= 5V, T
a
=25 ℃
(2) High input-output isolation voltage.(V
ISO
=3,750Vrms)
(3) Collector and emitter Voltage : 80V(MIN)
(4) Operating Temperature :-55 ℃ to 125 ℃
(5) Safety approval
UL approved (No.E323844)
VDE approved (No.40029733)
(6) In compliance with RoHS, REACH standards
(7) MSL Class Ⅰ
2
.
Instructions
The OR-3H7-4 series device contains four infrared led and four photo transistor detector.
They are encapsulated in a 16-pin SOP, free of halogens and Sb
2
O
3
3.Application Range
(1) Mixed PCB substrate requiring high density installation
(2) Programmable controller
(3) System apparatus and measuring instruments
4
.
Max Absolute rated Value (Normal Temperature=25℃)
Peak forward current(t=10us)
Collector and emitter Voltage
Emitter and collector Voltage
Rated Impulse Insulation Voltage
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)
Short between anode and cathode on the primary side and between collector and emitter on the secondary side
(2)
The isolation voltage tester with zero-cross circuit shall be used.
(3)
The waveform of applied voltage shall be a sine wave.
*2.soldering time is 10 seconds