Canadian Certification
TIMCO ENGINEERING, INC.
849 NW State Road 45
Newberry, Florida 32669
www.timcoengr.com
(352) 472-5500 • CB@timcoengr.com
June 23, 2021 Job Numbe
r
: 2765-21
Radio Cert. No.: IC: 21098-ESPC3MINI1
Espressif Systems (Shanghai) Co., Ltd.
Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China (201203)
Attention: Mia Zhou
Dear Espressif Systems (Shanghai) Co., Ltd.:
We have reviewed the test report and related documents, and are pleased to advise that this device meets our
procedural and specification requirements for certification. The field offices have been notified.
The assigned certification number and the model number must be shown on each equipment model. This
certification identification information may be shown on the equipment model identification plate or on a separate
label that shall be indelible and tamper proof. The certification number shall be prefixed with the letters “IC:”.
Radio equipment is certified as described on the attached certification certificate.
Certificate(s) are attached for the following HVIN/ model(s):
ESP32-C3-MINI-1
Please feel free to contact us if you have any questions or comments.
Sincerely,
Timco Engineering, Inc.
Canadian Certification
TIMCO ENGINEERING, INC.
849 NW State Road 45
Newberry, Florida 32669
www.timcoengr.com Job No. 2765-21
(352) 472-5500 • CB@timcoengr.com
TECHNICAL ACCEPTANCE CERTIFICATE
Certification No.
IC: 21098-ESPC3MINI1
Issued To
Espressif Systems (Shanghai) Co.,
Ltd.
Suite 204, Block 2, 690 Bibo Road,
Zhang Jiang Hi-Tech Park, Shanghai,
China (201203)
T
ested B
y
TA Technology(Shanghai) Co., Ltd.
Company No.: 8510A
Building 3, No. 145 Jintang Rd. Tangzhen Industry Park
Shanghai, 201201 CN
86-21-50791141; hanjinnan@ta-shanghai.com
Type of Equipment
other
Type of Service
New Certification (Single)
Hardware Version Id Number (HVIN)
ESP32-C3-MINI-1
Firmware Version Id Number (FVIN)
V1.1.3.0
Product Marketing Name: (PMN)
ESP32-C3-MINI-1
Host Marketing (HMN)
N/A
FREQUENCY RANGE
EMISSION
DESIGNATIONS
R.F. POWER
ANTENNA INFO
SPECIFICATION/ ISSUE & DATE
NECESSARY BANDWIDTH &
EMISSION CLASSIFICATION
2402-2480MHz 1M03F1D 0.012W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
2402-2480MHz 2M05F1D 0.012W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
2412-2462MHz 13M1G1D 0.177W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
2412-2462MHz 17M1D1D 0.171W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
2412-2462MHz 34M8D1D 0.099W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
2412-2462MHz 18M0D1D 0.141W PCB Antenna, 3.96dBi RSS-247 Issue 2; Feb. 17
Note 1: This equipment also complies with RSS-102, Issue 5 (March 2015) and RSS-Gen, Issue 5 (April 2018).
Certification of equipment means only that the equipment has met the
requirements of the above-noted specification. Licence applications,
where applicable to use certified equipment, are acted on accordingly
by the ISED issuing office and will depend on the existing radio
environment, service and location of operation. This certificate is
issued on condition that the holder complies and will continue to
comply with the requirements and procedures issued by ISED. The
equipment for which this certificate is issued shall not be
manufactured, imported, distributed, leased, offered for sale or sold
unless the equipment complies with the applicable technical
specifications and procedures issued by ISED.
I hereby attest that the subject equipment was tested and found in
compliance with the above-noted specifications.
La certification de l'équipement signifie uniquement que l'équipement a
satisfait aux exigences de la spécification susmentionnée. Les demandes de
licence, le cas échéant pour utiliser un équipement certifié, sont traitées en
conséquence par le bureau émetteur d'ISED et dépendront de
l'environnement radio, du service et du lieu d'exploitation existants. Ce
certificat est délivré à condition que le titulaire se conforme et continuera de
se conformer aux exigences et procédures émises par ISED. L'équipement
pour lequel ce certificat est délivré ne doit pas être fabriqué, importé,
distribué, loué, mis en vente ou vendu à moins que l'équipement ne soit
conforme aux spécifications et procédures techniques applicables émises par
ISED.
J'atteste par la présente que le matériel a fait l'objet d'essai et jugé conforme à
la spécification ci-dessus.
ISSUED UNDER THE AUTHORITY OF MINISTER OF INDUSTRY
DÉLIVRÉ AVEC L’AUTORISATION DU MINISTRE DES INDUSTRIES
DATE: June 23, 2021
Bruno Clavier, General Manager