Page 1 of 3
EU – TYPE EXAMINATION CERTIFICATE
RADIO EQUIPMENT DIRECTIVE 2014/53/EU
Annex III Module B
MANUFACTURER
Name : Espressif Systems (Shanghai) Co., Ltd.
Address : Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai,
China
Contact Name & Title : Mia Zhou/Engineer
Email : zhoumiaomiao@espressif.com
Phone number : (+86) 21-61065209
PRODUCT DESCRIPTION
Trademark/Trade Name : ESPRESSIF
Model Number : ESP32-MINI-1
Product Description : Wi-Fi & Bluetooth Internet of Things Module
NOTIFIED BODY
Certificate issued by : Notified Body 1177, TIMCO Engineering, Inc.
Certificate number : E1177-210044
Name and Signature : Bruno Clavier Date: January 27, 2021
The device shall be marked as follows:
Based on the evidence presented in the Technical Documentation, TIMCO Engineering, Inc., as appointed
Notified Body, has issued this EU-Type Examination Certificate in accordance with Annex III Module B. The
product described appears to be in conformity with the essential requirements Article 3.1(a), 3.1(b), and 3.2 of
RED 2014/53/EU. This certificate relates only to the documents as provided to Timco Engineering, Inc. and is
valid up to (1) the date of cessation of presumption of conformity of any of the superseded standards which
were used for testing this product and assessed by Notified Body or (2) the date of modifications to the
approved type that may affect the conformity of the apparatus with the essential requirements of this Directive
or the conditions for validity of that certificate, whichever comes first.
TIMCO ENGINEERING, INC.
P.O. BOX 370
NEWBERRY, FL 32669
www.timcoengr.com
This Certificate is issued under the provision that TIMCO Engineering Inc. nor its
subsidiary companies accept any liability concerning the contents of this document other
than forced by law. Reproduction of the Certificate (with Annex) in full is allowed.
Reproduction of parts of this certificate may only be allowed by written permission of
TIMCO Engineering, Inc.
Page 2 of 3
EU – TYPE EXAMINATION CERTIFICATE
E1177-210044
Date: January 27, 2021
PRODUCT SPECIFICATIONS
Intended Use / Cate
g
or
y
: Wi-Fi
RF output powe
r
(t
y
pe) : 18.34 dBm (EIRP)
Frequenc
y
ran
g
e (MHz) : 2412-2472 MHz
Modulation : DSSS, OFDM
Antenna t
y
pe and Gain : PCB Antenna, 2.87dBi
Intended Use / Cate
g
or
y
: Bluetooth
RF output powe
r
(t
y
pe) : 9.92 dBm (EIRP)
Frequenc
y
ran
g
e (MHz) : 2402-2480MHz
Modulation : GFSK, π/4-DQPSK, 8-DPS
K
Antenna t
y
pe and Gain : PCB Antenna, 2.87dBi
Intended Use / Cate
g
or
y
: BLE
RF output powe
r
(t
y
pe) : 7.26 dBm (EIRP)
Frequenc
y
ran
g
e (MHz) : 2402-2480MHz
Modulation : GFS
K
Antenna t
y
pe and Gain : PCB Antenna, 2.87dBi
According to the Technical Documentation compiled by the Manufacturer, this radio equipment was assessed
for compliance with the following standards, which were applied in full:
ESSENTIAL REQUIREMENTS ASSESSED
Essential Requirement Standard Number & Version
Radio (Article 3.2) : ETSI EN 300 328 V2.2.2
EMC (Article 3.1b) : EN 55032: 2015 + A11:2020
EN 55035: 2017 + A11:2020
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Health (Article 3.1a) : EN 50665: 2017
EN IEC 62311: 2020
Safet
y
(Article 3.1a) : EN IEC 62368-1: 2020+A11: 2020
CERTIFICATE CONDITIONS:
This radio module has been assessed for use in the temperature range of -40°C to +85°C. This radio module is
for professional installation only. When installing this radio module permanently into a host product to a create
new radio equipment device; the manufacturer responsible for placing the final radio product on the market in
the EU must assess if the combination of this radio module and the host product complies with the essential
requirements of the RE Directive 2014/53/EU.