1
1. SPECIFICATION DISTRIBUTION
No restrictions for issue
2. SCOPE
T
his specification contains the application notes for the 9159-500 and 9159-550 connectors.
3. PRODUCTS
00
-9159-00X-50X-X06 sales drawing 00-9159-01_500S (section 4).
00-9150-00X-55X-X06 sales drawing 00-9159-01_550S (section 5).
T
he colours used in this document are for illustration purposes only.
4. 9159-500 SERIES THROUGH BO ARD MOUNTING
4.1. STANDARD SMT MOUNTING
4.2. ASSEMBL ING CAP
CARD EDGE CONNECTO R
201-01-137
Connector assembly.
T ypica lly 00-9159-00X-501-X06.
Capped connector assembly.
T ypica lly 00-9159-00X-502-X06.
Cap can be supplied separately.
Basic PCB layout, cut out for connector. Check sales
drawing for PCB layout details. Connector on board.
Connector drops into top of PCB.
Cap covers contacts.
Separate caps (60-9159-350X-0X-000)
can be assembled to top of connector
either before or after mounting on a
PCB, check orientation is correct
before inserting.
© KYOCERA AVX
FOLLOW US:
1 AVX Blvd. Fountain Inn, SC 29644
(864) 967-2150
WWW.KYOCERA-AVX.COM
© KYOCERA AVX
FOLLOW US:
1 AVX Blvd. Fountain Inn, SC 29644
(864) 967-2150
WWW.KYOCERA-AVX.COM
2
4.3. MATING PCB
5. 9159-550 SERIES TOP MOUNTING
5.1. STANDARD SMT MOUNTING
5.2. MATING PCB
Wide slot width for
0.80mm thick PCB
1.60mm thick PCB
0.80mm PCB
1.60mm PCB
Check the sales drawing details for the correct
dimensions and pad layout of the mating PCB.
Connector assembly typically 00-9159-00X-551-X06.
Basic PCB
layout
Connector
drops straight
onto PCB
Connector
on board
0.80mm PCB
1.60mm PCB
Check the sales drawing details for the correct
dimensions and pad layout of the mating PCB.
Wide slot width for
0.80mm thick PCB
Narrow slot width for
1.60mm thick PCB