© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • SpeedMaster™ Catalog
Dimensions in Inches (millimeters) are subject to change without notice.
Pre-wired SpeedMaster assemblies are 100% tested and ready for use. For use with Series
23 SuperNine connectors with keyed size #8 cavities, these assemblies are available with
three termination options: single-ended SpeedMaster contacts on one end, SpeedMaster
contacts on both ends, or SpeedMaster contact on one end and RJ45 plug on the other end.
Part Number Development
Sample Part Number 85750001 A C 1 12
Product 8575-0001
End A Contact Type*
-A = 858-101-X SpeedMaster pin
-B = 858-100-X SpeedMaster socket
End B Contact/
Connector*
A = SpeedMaster pin
B = SpeedMaster socket
C = RJ45 plug
N = No connector
Cable Option
-1
= 963-003-24 -5 = 963-033-24
-2 = 963-003-26 -6 = 963-033-26
-4 = 963-037
Length Overall length in inches
Technical Data
Specications
Operating temperature: -65°C to
+200°C (SpeedMaster) or -40°C to
+85°C (RJ45); cable dependent
Meets EIA/TIA 568C.2-10 and IEC
60603-7-51 Cat 6A 500 MHz
Characteristic Impedance: 100 ohms
Insulation resistance: 200 megohms
min.
Durability: 500 mating cycles
SpeedMaster Construction
Isolator body: copper alloy/electroless
nickel
Contacts: copper alloy, gold plated
Retention ferrule and shield ferrule:
copper alloy/electroless nickel
Insulator: rigid plastic/N.A.
O-rings/grommets: fluorosilicone
blend/N.A.
RJ Construction
Body: UL 94-V0 polycarbonate
Grommet: UL 94-V0 polycarbonate
Contacts: copper alloy, 50 microinches
selective gold plating
Shield: nickel-plated copper alloy
Notes
1. 100% tested for continuity, DWV and IR.
2. Not available in pin to pin or socket to
socket congurations..
Contact Positions
Mating Face of Pin
Contacts
Mating Face of
Socket Contacts
3
4
5
5
6
6
7
8
1
2
858-101
PIN MODULE FACE
3
4
7
8
1
2
858-100
SOCKET MODULE FACE
3
4
5
5
6
6
7
8
1
2
858-101
PIN MODULE FACE
3
4
7
8
1
2
858-100
SOCKET MODULE FACE
Pin Contact
Option A
P1 End P2 End; See Note 2
RJ45 Contact
Option C
Socket Contact
Option B
Pin Contact
Option A
Socket Contact
Option B
OVERALL LENGTH
TOLERANCE
UP TO 60 INCHES +1.80/-0.00 (0.0)
OVER 60 INCHES +3% / -0%
END P1
END P2
SERIES 23
High-speed connectors
8575-0001 SpeedMaster™ Cat 6A contacts, pre-wired
for use in MIL-DTL-38999 Series III type connectors
Connector Compatibility
Glenair 824-009 and -010 Mighty Mouse
Glenair 280-098 thru -103 HiPer-D
Glenair 233-219 SuperNine
Rev. 04.15.20
* Not available in pin to pin or socket to socket congurations
858-102 is superseded by 8575-0001
© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • SpeedMaster™ Catalog
Dimensions in Inches (millimeters) are subject to change without notice.
8575-0001 SPEEDMASTER™ WIRING DIAGRAMS
ORN
WHT/ORN
WHT/BLU
BLU
WHT/BRN
BRN
WHT/GRN
P2
RJ45
GRN
P1
SPEEDMASTER
PIN OR SOCKET
SPEEDMASTER PIN OR SOCKET TO RJ45 PLUG
1
2
3
4
5
6
7
8
1
2
5
4
7
8
3
6
858-102-AC OR -BC
WIRING DIAGRAM
P2
SPEEDMASTER
P1
PIN OR SOCKET
SPEEDMASTER
PIN OR SOCKET
WHT/ORN
ORN
WHT/BLU
BLU
WHT/BRN
BRN
WHT/GRN
GRN
PAIR 4
PAIR 1
OMIT P2 FOR 858-102-AN OR -BN
SPEEDMASTER TO SPEEDMASTER IS 1 TO 1.
MUST BE PIN TO SOCKET OR SOCKET TO PIN
858-102-AB OR -BA
WIRING DIAGRAM
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
PAIR 2
PAIR 3
SERIES 23
High-speed connectors
8575-0001 SpeedMaster™ Cat 6A contacts, pre-wired
for use in MIL-DTL-38999 Series III type connectors
Rev. 04.15.20