BF14U2-6875
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-117
PRODUCT BRIEF
Line Replaceable Unit (LRU) Copper to Fiber Media Converter,
Single or Dual Channel, Flange Mount
10/100/1000BASE-T to Fiber Optic Ethernet
(1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 28VDC (DO-160
Audio Conducted Susceptibility Cat Z),
Lightning Strike (DO-160 level 3 waveform 3/3)
M38999 (ARINC801), M38999 (Quadrax), M38999 (Power)
REV
DESCRIPTION
DATE
APPROVED
19
Preliminary
01/07/2016
MF
20
Add ECCN
05/24/2016
RAS
21
Add new part number to have two different fiber channels
09/29/2016
GC
22
Corrected J1 Mating plot
12/08/2016
TC
23
Add Flow Control Option
03/31/2017
RAS/GC
24
Update Copyright date
05/26/2017
GC
25
Update Quadrax Mating Connector PN
08/21/2018
GC
26
Add UID label specs. Add FO Inspection/Cleaning Tools. Correct characteristics to show PRBS 7
03/13/2019
YA
27
Update the Part Number Development Instruction
04/02/2019
RAS/YA
28
Updated mating fiber optic connector part number
01/24/2020
JLL
©2014 Glenair, Inc. REV: 27 US Cage Code 06324 Printed in USA
GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com PAGE 2 of 18 E-mail: sales@glenair.com
050-117 PRODUCT BRIEF
Line Replaceable Unit (LRU) Media Converter, Flange Mount
10/100/1000BASE-T to Fiber Optic Ethernet (SX, LX10 or FX)
10/100/1000BASE-T to 1000BASE-SX or 1000BASE-LX10
The Glenair 050-117 Flange Mount Copper to Fiber Media Converter can be
configured as either Single Channel or Dual Channel and can convert
10/100/1000BASE-T to 1000BASE-SX, 1000BASE-LX or 100BASE-FX protocols.
It is designed for harsh environments and incorporates electronics in an
environmentally sealed enclosure that incorporates three environmental M38999
connectors. The power supply is designed to accept a wide DC input voltage
range, 18V to 36V and dirty 28V power as defined in DO-160. Power is supplied
through a 38999 with standard #22D contacts. Signal I/O passes through a 38999
with a combination of Quadrax and #22D contacts and Fiber Optics passes
through a 38999 using ARINC 801 contacts which can be configured to support
either single mode or multi-mode fiber applications.
KEY FEATURES/BENEFITS
▪ 1310nm FP Lasers for 1000BASE-LX10
▪ InGaAs PIN PD for 1000BASE-LX10
▪ 850nm Lasers for 1000BASE-SX
▪ GaAs PIN PD for 1000BASE-SX
▪ 1300nm LED for 100BASE-FX
▪ PIN PD for100BASE-FX
▪ Wide Input Voltage Range: 18-36V
▪ Electrical Interface compliant with IEEE
802.3 (10/100/1000BASE-T)
▪ Optical Interface compliant with IEEE 802.3
(1000BASE-LX10/-SX, 100BASE-FX)
▪ DO-160 – Compliant to Lightening Strike
Category A3J3XX & Voltage Spike Category A
▪ DO-160 – Compliant to Audio Frequency
Conducted Susceptibility input, Category Z
▪ Contact Glenair if Flow Control is required
▪ Ethernet MDI/MDIX automatic crossover
▪ Magnetics on the electrical signal input side to support
10/100/1000BASE-T operation over 100m Cat 5E
▪ IP67 in mated condition
▪ M38999 Quadrax & pin for Signal, BIT and service port
▪ M38999 Power
▪ M38999 ARINC 801 for Fiber Optic
▪ Flange Mount
▪ Single or Dual Channel Configurations
OPTIONAL FEATURES
▪ Built In Test Console Port accessible via USB2.0
▪ Built in Test Console Port accessible via UART-RS422
APPLICATIONS
• Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications