Page 2 | AlliedWare™ OS How To Note: VPNs with NetScreen routers
What information will you find in this document?
This How To Note begins with the following information:
z "Related How To Notes" on page 2
z "Which products and software version does it apply to?" on page 2
Then it describes the configuration, in the following sections:
z "The network" on page 3
z "How to configure the Allied Telesis router" on page 4
z "How to configure the NetScreen router" on page 13
z "How to test the tunnel" on page 26
z "The router commands" on page 28
Related How To Notes
Allied Telesis offers How To Notes with a wide range of VPN solutions, from quick and
simple solutions for connecting home and remote offices, to advanced multi-feature setups.
Notes also describe how to create a VPN between an Allied Telesis router and equipment
from a number of other vendors.
For a complete list of VPN How To Notes, see the Overview of VPN Solutions in How To Notes
in the How To Library at www.alliedtelesis.com/resources/literature/howto.aspx.
Which products and software version does it apply to?
The VPN wizard is available on the following Allied Telesis routers, running Software Version
2.9.
1
or later:
z AR4
1
5S
z AR440S, AR44
1
S, AR442S
You can use the command line to set up an equivalent configuration on AR700 and other
AR400 Series routers. See "The router commands" on page 28 for a complete list of the
commands that the configuration uses.
We created this example with a NetScreen 25, running ScreenOS 4.0.3r4.0.
The screenshots in this Note are from an Internet Explorer 6.0 browser running on
Windows XP and Windows 2000.