Beverly Microwave Division

www.cpii.com/bmd

Beverly Microwave Division

150 Sohier Road • Beverly, MA 01915

Phone: +1(978) 922-6000 • Email: bmdmarketing@cpii.com

www.cpii.com/bmd

• Solid State Power Amplifiers • Integrated Microwave Assemblies

• Receiver Protectors • Control Components • Transmitters • Amplifiers

• Modulators • Magnetrons • Crossed Field Amplifiers

• Ring Loop Traveling Wave Tubes • Power Couplers

• Solid State Power Amplifiers • Integrated Microwave Assemblies • Receiver Protectors

• Control Components • Transmitters • Amplifiers • Modulators • Magnetrons

• Crossed Field Amplifiers • Ring Loop Traveling Wave Tubes • Power Couplers

Receiver Protectors and

Control Components

The values listed above represent specified limits for the product and are subject to change. The data should be used for basic

information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.

For information on this and other CPI products visit our web page at www.cpii.com/bmd, or contact:

CPI Beverly Microwave Division, Telephone: +1 (978) 922-6000 • FAX: +1 (978) 922-8914 • Email: bmdmarketing@cpii.com

4/16

Receiver Protectors

Solid State Limiters

Plasma Limiters

Solid State Switches

Pressure Windows

Waveguides

Duplexers

Multipactors

Radar Block Diagram

CPI BMD produces a compact, more efficient integrated component, by

optimizing performance, reducing development costs and ultimately,

providing increased functionality to the end product.

This Radar Block Diagram depicts the various building blocks of a typical radar system that CPI BMD is

capable of integrating to fit your design needs.

Ask us about integrating your designs today.

Historically, radar system designers selected various components from different suppliers without the ability

to accomodate how they interact. CPI BMD has a successful history of providing additional functionality

to receiver protectors, by integrating passive and active components into a single, Integrated Microwave

Assembly (IMA).

RP/CC PG. 4

CPI’s Beverly Microwave Division (CPI BMD) has

been designing and manufacturing receiver

protector products at its Beverly, Massachusetts

location continuously for over 60 years. CPI BMD

is the largest and most sophisticated manufacturer

of such products in the world today. Current

designs span the spectrum from low-frequency

coaxial limiters to complete Pre-TR Limiter,

TR limiters with attenuation and phase control up

to Ka-Band. CPI BMD's products are manufactured

in all transmission line types, including waveguide,

coax, stripline and microstrip. Advances in

computer-aided modeling techniques have made it

possible for CPI BMD to achieve performance

levels that would have been unheard of only a few

years ago. CPI BMD's modern and extensive

low- and high-power test facilities allow for

complete verification of specified performance

parameters.

Receiver Protectors and

Control Components

Beverly Microwave Division

www.cpii.com/bmd

Pre-TR / TR / Limiters

• Available in frequencies:

L, S, C, X, Ku, Ka Bands

• High peak power

• Fast recovery time

• Manages various waveforms

• Low loss protection

Pre-TR / Limiters

• Available in frequencies

L, S, C, X, Ku, Ka Bands

• High peak power

• Very fast recovery times

• Low output leakage

• Superior broadband isolation

• Solid State Power Amplifiers • Integrated Microwave Assemblies • Receiver Protectors • Control Components • Transmitters • Amplifiers • Modulators • Magnetrons • Crossed Field Amplifiers • Ring Loop Traveling Wave Tubes • Power Couplers

For more Receiver Protector and Control Component

products:

www.cpii.com/bmd

Solid State Limiters

• Available in frequencies:

L, S, C, X, Ku, Ka Bands

• High peak power handling

• Very fast recovery times

• Reliable out of band protection

TR / Limiters

• Available in frequencies:

L, S, C, X, Ku, Ka Bands

• High peak power

• Longer recovery times

• Very low loss

• Passive protection

• Compact design

Applications:

• Missile seekers

• Airborne radar and EW

• Unmanned Aerial Vehicles (UAV)

• Ground based systems

• Naval radars

• Air traffic control

• Weather radars

• Digital / Analog Attenuation

• Low Noise Amplifiers (LNA)

• Absorptive Limiters

• Couplers

• High Power Circulators

• Filters

• Noise Sources

• Integrated Loads

• BITE Circuits

Ask us about integrating

additional functionality...

Microwave Switches

• Available in frequencies:

L, S, C, X, Ku, Ka Bands

• Low insertion loss

• Digital control

• Fast switching time

• SPST

• SPDT

Pressure Windows

• Available in frequencies:

L, S, C, X, Ku, Ka , W Bands

• Materials: glass, ceramic,

quartz, Teflon fiberglass,

Beryllium Oxide

• Low loss, low cost

• Option to add gaskets

• Option for liquid cooling

RP/CC PG. 2

RP/CC PG. 3