CONTEC CO., LTD.

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

https://www.contec.com/

No part of this document may be copied or reproduced in any form by any means

without prior written consent of CONTEC CO., LTD.

NA06461 (LYWK838) 04302021_rev8 [10192018] April 2021 Edition

Product Guide

IoT Edge Controller

CPS-BXC200 Series

Thank you for purchasing this product. The product you have purchased consists of the

following items.

Check, with the following list, that your package is complete.

If you find any item either missing or damaged, please contact the sales representative you

purchased the product from.

For appropriate usage, be certain to read the Reference Manual before using this product.

Visit our website for downloading free other software tools.

The following manuals come with this product. Visit our website and download them by

entering the model type in "Downloads". Read them before using the product.

Before using the product, be certain to read the following guide, manual, and driver soft-

ware. They can be downloaded from Contec website.

Name

Contents

How to get

Product Guide (This sheet)

This lists the product configuration and

describes the precautions.

Included in the

package (Printed

matter)

Reference Manual

This describes the hardware aspects

such as functions and settings.

Download (PDF)

Download

https://www.contec.com/download/

1. About the Product

This product is an IoT Edge Controller which is mountable on 35mm DIN rail. Connect the

configurable type module of CONPROSYS series and such functions as analog I/O can be

provided.

Intel Atom Processor E3950 has been adopted to CPU. The use of readily available parts

ensures the ease of the use of the product. In addition, the use of Contec-customized BIOS

allows support to be provided at the BIOS level.

Regarding Edgecross basic software (Trial version)

The CPS-BXC200-WxxxxA contains the Edgecross basic software (trial version).

The shortcut menu is provided on the desktop.

In order to use the product, accept the Software License Agreement (ECD-CO4-0007-03-

xx.pdf) and read the Installation Instructions (ECD-MA1-0003-01-xx.pdf).

Please contact the Edgecross Consortium for details on purchasing product licenses or

licensed technical support.

https://www.edgecross.org/

As for the CPS-BXC200-WxxxxA, CONTEC will grant the Customer the right to install

CONTEC data collector (software) when purchasing this particular product. Contact your

retailer for details.

2. Product Configuration

This product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or

missing items, contact your retailer.

CPS-BXC200-NAxxx

[Base model]

CPS-BXC200-Wxxxx

[OS-installed model]

Name

Pcs.

Product

End Cover

(attached to the product)

1 1

CFast Card Removal Prevention fitting

USB Removal Prevention Fitting

Cable Tie

Washer Assembled Screw (M3 x 6)

3-pin Connector

6-pin Connector

DIN Rail

Product Guide (this sheet)

Warranty Certificate

Serial Number Label

END USER LICENSE AGREEMENT (OS)

- *1

Setup Procedure Document

- *1

Recovery Media

- *1

*1 Not included in the base model.

3. Safety Precautions

Understand the following definitions and precautions to use the product safely.

The caution mark " " on the face of the product indicates that you should always check

the meanings of the symbol described in the “Reference Manual”, and this is available in

our website. Visit < https://www.contec.com/download/> to download.

Handling Precautions

DANGER

 Do not use the product in locations exposed to a flammable or corrosive gas. It may

cause explosion, fire, electrical shock, or malfunction.

 Do not allow the device to come into contact with foreign substances (metal particles,

flammable substances, liquids, etc.) Otherwise, it can cause fire or electrical shock.

 Do not place the product in an unstable location or use incomplete mountings. Other-

wise, it may cause the device to fall.

 Be sure to connect the product to the stipulated power supply voltage. Connecting to a

different voltage might cause a fire or electrical shock.

 If the product is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

 The product is not intended for use in aerospace, space, nuclear power, medical equip-

ment, or other applications that require a very high level of reliability. Do not use the

product in such applications.

 If using the product in applications where safety is critical such as in railways, automotive,

or disaster prevention or security systems, please contact your retailer.

CAUTION

 Do not use or store the product in a location exposed to extremely high or low temper-

ature that exceeds range of specification or susceptible to rapid temperature changes.

e.g. - Exposure to direct sun

- In the vicinity of a heat source

 Do not use the product in extremely humid or dusty locations. It is extremely dangerous

to use the product with its interior penetrated by water or any other fluid or conductive

dust. If the product must be used in such an environment, install it on a dust-proof con-

trol panel, for example.

 Avoid using or storing the product in locations subject to shock or vibration that exceeds

range of specification.

 When transporting the product, take suitable measures to avoid applying shock or vi-

bration directly to the product.

Impact resistance: 15G (11ms) below.

 Use the product in the specified operating condition (temperature, humidity, vibration

and shock).

 The product should always be grounded (earth).

 Avoid installing in the place where ventilation of the product may compromise. Insuffi-

cient aeration could heat up the product and lead to malfunctions or damages.

 Do not use the product in the vicinity of devices that generate strong magnetic force or

noise. Such products will cause the product to malfunction (stop, reboot).

 Do not use or store the product in the presence of chemicals.

 When removing connectors or cables, always unplug the power cables and confirm the

LEDs are turned off.

 Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,

resulting from modifying the product.

 In the event of failure or abnormality (foul smells or excessive heat generation), unplug

the power cables immediately and contact your retailer.

 To connect with peripherals, use a grounded, shielded cable.

 To clean the product, wipe it gently with a soft cloth dampened with either water or mild

detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to

prevent the paint to be scraped or discolored.

 When connecting cables, first check the shapes of connectors, and then insert them in

the correct orientation. After they are connected, do not put too much load on the con-

nected part. Doing so may result in poor contact or damage to the product and the

connected part.

 Do not touch metal parts or terminals with your hands when the product is in operation.

Otherwise, the product may malfunction, or cause failure.

 Do not touch the product or connectors with a wet hand to avoid electric shock.

 The specifications of the product are subject to change without notice for enhancement

and quality improvement. Even when using the product continuously, be sure to read

the manual in the CONTEC's website and understand the contents.

 When the product is used in a place that is affected by overcurrent or overvoltage (light-

ning surge), select appropriate surge protection device for all of the route (Signal line,

etc.). Consult with the specialist regarding selecting, purchasing, and setting the surge

protection device.

 When disposing of the product, follow the disposal procedures stipulated under the rel-

evant laws and municipal ordinances.

 Disconnection between the product and the module during the operation may result in

damage. To prevent the disconnection, always mount both of them on DIN rail for oper-

ations.

 To prevent damages of files, always shutdown the OS before turning off this product.

 CONTEC shall not be responsibility for damages caused by malfunctions due to combin-

ing the product with other devices.

 Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-

ever (Including damages for loss of business profits) arising out of the use or inability to

use this CONTEC product or the information contained herein.

The caution turned on power supply

When you turned the power switch off, wait for another 5 or more seconds, then turn it on.

This product may not display in screen correctly due to the power on timing of display.

Turn on the power to the display before turning on the product.

In some USB devices, current flows backward to PC through the connection cable when

turning the product off. If you connect those devices, 5V power is not fully turned off so

that the product may not be started. In such cases, connect it again after having detached

the USB device and turned the power on. (When you use the USB device as the boot one,

connect it before detecting the device.)

Battery handling and the storage in EU

signatory

Note:

This symbol mark is according to the directive 2006/66/EC

Article 20 Information for end-users and Annex II.

This symbol mark means that batteries and/or accumulators, at their end-of-life, should be

disposed separately from the household waste.

If a chemical symbol is printed beneath the symbol mark shown above, it indicates that the

battery or accumulator contains a heavy metal at a certain concentration.

The concentration standard is indicated below:

Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)

These ingredients may cause serious hazardous for human and the global environment.

Please refer to the reference manual for the annulment of detaching a detailed battery

specification and the battery and the batteries.

Setting and Removing the Module

Always unplug the power cable of the product before setting or removing the module.

4. Specifications

 Function Specifications

Item

CPS-BXC200-xxxxx

CPU

Intel Atom

Processor x7-E3950 1.6 GHz

BIOS

BIOS mfd. by AMI

Memory

204-pin SO-DIMM socket x 1,

PC3L-10600(DDR3L 1333) ECC

4GB

8GB

Graphic Controller

Intel

HD Graphics 505 (built-in CPU)

System

maximum

resolution

Analog RGB

1920 x 1200 @ 60Hz

Display Port

3840 x 2160 @ 60Hz

Display

Analog RGB×1 (15-pinHD-SUB connector),

DisplayPort×1

M.2 card slot

1 slot, M.2 2242, SATAIII

CPS-BXC200-xx0xP03: M.2 card (pSLC, 32GB) *1

CPS-BXC200-xx0xP05: M.2 card (pSLC, 64GB) *1

CPS-BXC200-xx0xM03: M.2 card (MLC, 32GB) *1

CPS-BXC200-xx0xM05: M.2 card (MLC, 64GB) *1

CFast card slot

1slot, CFast CARD Type I, bootable

LAN

Intel I210IT controller

1000BASE-T/100BASE-TX/10BASE-T 3ports (RJ-45 con-

nector) (Wake On L AN support)

USB

USB 3.2 Gen1 (USB3.0) compliant 3ports (TYPE-A con-

nector x 3)

Serial I/F

RS-232C (general-purpose) 1 port (SERIAL PORT A)

9-pin D-SUB connector (male)

Item

CPS-BXC200-xxxxx

Baud rate: 50 - 115,200bps

Watchdog timer

WDT: Software programmable, 1sec - 255sec

(Time up allows reset, shutdown)

General-purpose I/O

Isolation: Input 2 channels (one input switched

between remote reset or remote power-on)

Isolation: Output 1 channel (output can be switched to

WDT external output)

Hardware monitoring

Monitoring CPU temperature, power voltage

RTC/CMOS

Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at

25°C) per month (RTC with built-in CPU)

Power Management

Power management setup via BIOS, Power On by Power

On by Ring / Wake On LAN, PC98/PC99 ACPI Support

PC98/PC99 ACPI Power management

Stack Bus

The maximum number of stack buses: 8

(The total current consumption of the devices should be

less than 3.3A.)

RAS

1 port (3.81mm pitch 6-pin)

Power

supply

Rated input voltage

24VDC

Range of input voltage

24V±10%

Power consumption

(Max.)

24V 1.5A (USB I/F, without stack bus power supply)

24V 4.8A (USB I/F, with stack bus power supply)

External device power

supply capacity

CFast card slot: +3.3V 0.5A (500mA x 1),

USB3.0 I/F: +5V 2.7A (900mA x 3),

Stack Bus I/F: 24V 3.3A

Physical dimensions (mm)

76 (W) x 94(D) x 124.8(H) (not include projection)

Weight

1.1kg

Installation method

Quick mounting onto 35mm DIN rail

*1 The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that

can be recognized from OS might be displayed fewer than an actual value.

*2 If you use the 1000BASE-T, be careful of the operating temperature.

 Installation Environment Requirements

Item

CPS-BXC200-xxxxx

Operating Temperature *3

-20 - +70°C (With 1000BASE-T : -20 - 65°C) ,

airflow 0.7m/s

-20 - +60°C (With 1000BASE-T : -20 - 55°C) ,

no airflow

Storage Temperature

-20 - +60°C

Humidity

10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A, UL,

CE Marking (EMC Directive Class A, RoHS Directive)

*3 Derating occurs due to the way of installation and the load conditions.

5. Physical Dimensions