D1-1
⻬ PCI Bus
⻬ 12-Bit 330 KHz
A/D Converter
⻬ OME-PCI-1800H,
OME-PCI-1800L:
16 Single-Ended/
8 Differential Inputs,
2K Word FIFO
⻬ OME-PCI-1802H,
OME-PCI-1802L:
32 Single-Ended/16
Differential Inputs,
8K Word FIFO
⻬ 330 KSamples/s for
Single Channel or
Multiple Channels
⻬ Trigger Methods:
Software Trigger, Pacer
Trigger, External Trigger
⻬ External Triggers:
Post-Trigger, Pre-Trigger,
External Pacer Trigger
⻬ OME-PCI-1800L,
OME-PCI-1802L
Programmable Low-Gain:
0.5, 1, 2, 4, 8
⻬ 16 Digital Input and 16
Digital Output Channels
⻬ OME-PCI-1800H,
OME-PCI-1802H
Programmable High-
Gain: 0.5, 1, 5, 10, 50,
100, 500, 1000
⻬ Two Optional 12-Bit
Independent
Programmable DACs;
2 MHz Throughput per
Channel (Max)
⻬ 2.7M Word/High-Speed
Data Transfer Rate
⻬ Includes Software
Development Kit
⻬ Half-Size Board
The OME-PCI-1800 Series is a
family of high-performance data
acquisition boards for the PCI bus.
It features continuous, 330 kHz,
gap-free data acquisition under
DOS and Windows.
The OME-PCI-1800 family has
two 12-bit D/A output channels,
16 digital input channels, and
16 digital output channels.
The OME-PCI-1800H and
OME-PCI-1800L provide 16
single-ended or 8 differential inputs.
The OME-PCI-1802H and
OME-PCI-1802L provide 32
single-ended or 16 differential
inputs. The suffix “H” denotes a
high-gain model and the “L” denotes
a low-gain model. The boards
feature advanced scanning
features. The scanning mechanism
not only scans the different input
channels at vastly different rates,
but also at different gains. Even in
multichannel scan mode, the
sampling rates can be maintained
at 330 KS/s.
The OME-PCI-1800 Series also
has some outstanding features,
including:
•
Data transfer rate of digital I/O
is up to 5.4 MB
•
Throughput of D/A is up
to 2 MHz (max)
•
Three flexible external trigger
modes such as post-trigger,
pre-trigger, middle trigger
•
True “plug & play” under DOS
and Windows
•
On-board FIFO
High-Performance Analog
and Digital I/O Boards
OME-PCI-1800H/L and
OME-PCI-1802H/L: 330 KS/s 12-Bit Series
OME-PCI-1800H,
$759, shown smaller
than actual size
$
759
Basic Unit
OM-PCI-1800L & 1802L Analog Input Ranges
Gains Bipolar (V) Unipolar (V) Throughput
0.5 ±10 V 0 to 10 V 330 KS/s
1 ±5 V 0 to 10 V 330 KS/s
2 ±2.5 V 0 to 5 V 330 KS/s
4 ±1.25 V 0 to 2.5 V 330 KS/s
8 ±0.625 V 0 to 1.25 V 330 KS/s
D1-2
D1
ANALOG
INPUT
AND
MULTIFUNCTION CARDS
OME-DB-16P, $99, shown smaller than actual size
OME-PCI-1800 Series
System Expansion
Several daughter boards are
available that can expand the
analog and digital I/O capability
of the OME-PCI-1800 Series
high-performance data acquisition
boards. These include:
OME-DB-1825, OME-DB-8225,
OME-DB-8025, OME-DB-889D,
OME-DB-16P, OME-DB-16R.
OME-DB-889D 16-Channel
Analog Multiplexer Board
The OME DB-889D is an expansion
multiplexer/amplifier board for use
with OME-PCI-1800H/L boards.
Each OME-DB-889D multiplexes
16 differential analog input channels
into one analog input of the data
acquisition board. The high-grade
instrumentation amplifier provides
software programmable gains of
0.5, 1, 5, 10, 50, 100, 500, and
1000. Thermocouple measurements
are handled easily with the OME-DB-
889D. The board includes cold-
junction sensing and compensation
circuitry that provides a scaling of
24.4 mV/°C. Biasing resistors are
included for open thermocouple
detection. The OME-DB-889D can
be cascaded to a total of 128
channels of voltage measurements
or 112 channels of thermocouple
measurement.
OME-DB-16P 16-Channel
Isolated Digital Input Board
The OME-DB-16P is a 16-channel
isolated digital input daughter board
for any of the OME-PCI-
1802H/1802L/1800H/1800L/1602/
1602F/1202H/1202L/1002H/1002L
PCI-bus multifunction boards.
The optically isolated inputs of the
OME-DB-16P consist of a bi-
directional OPTO-coupler with
a resistor for current sensing. The
OME-DB-16P can be used to sense
DC signals from TTL levels up to
24 V and also a wide range of AC
signals. The OME-DB-16P can also
be used to isolate the computer
from large common-mode voltages,
ground loops and voltage spikes
that often occur in industrial
environments.
OME-DB-16R 16-Channel
Relay Output Board
The OME-DB-16R 16-channel relay
output board consists of 16 Form C
relays for efficient switching of loads
by programmed control.
The OME-DB-16R can be used with
any of the OME-PCI-1802H/1802L/
1800H/1800L/1602/1602F/1202H/
1202L/1002H/1002L PCI-bus
multifunction boards. The relays are
energized by applying a 5 V signal
to the appropriate relay channel on
the 20-pin flat cable connector.
Sixteen annunciator LEDs, one for
each relay, light when their associated
relay is activated. To avoid
overloading the PC’s power supply,
this board provides a screw terminal
connection for a power supply.
Software
Development Kit
All data acquisition boards are
supplied with a standard software
development kit for Windows
98/NT/2000/XP. The software
development kit includes DLL
files for programming in C, C++,
or other high-level languages,
and OCX files
for Visual Basic
or Active X
programming.
LabVIEW drivers
are also included.
Specifications
ANALOG INPUT SPECIFICATIONS
Input Channels:
OME-PCI-1802H/L, 32 SE/16 Diff
OME-PCI-1800H/L, 16 SE/8 Diff
Resolution: 12 bits
Conversion Rate: 330 KS/s
Input Impedance:
10,000 M1/6 pf
Overvoltage Protection:
±35 V
Accuracy:
0.01% of reading, ±1 bit
On Board FIFO:
OME-PCI-1800 H/L: 2K
OME-PCI-1802 H/L: 8K
OME-DB-16R, $149, shown smaller than actual size
OM-PCI-1800H & 1802H Analog Input Ranges
Gains Bipolar (V) Unipolar (V) Throughput
0.5 ±10V 0 to 10 V 40 KS/s
1 ±5V 0 to 10 V 40 KS/s
5 ±1V 0 to 1 V 40 KS/s
10 ±0.5V 0 to 1 V 40 KS/s
50 ±0.1V 0 to 0.1 V 10 KS/s
100 ±0.05V 0 to 0.1 V 10 KS/s
500 ±0.01V 0 to 0.01 V 1 KS/s
1000 ±0.005V 0 to 0.01 V 1 KS/s