Part Number 231 | rev 210308 | Page 1
F. WALTHER ELECTRIC CORP | P (732) 537-9201 | F (732) 537-9209 | WWW.WALTHERELECTRIC.COM
PRODUCT DATA SHEET
Part Number
231
EAN
4015609000272
Manufacturer
Walther-Werke
WEEE-Reg-Nr:
DE 22131895
32A Plug 5P 400V 6hr IP44
• High impact thermoplastic housing featuring high resistance
and toughness creating an abrasion-resistant material
• Retaining Device
• Internal Strain Relief with “swing-away” feature
• Locking Ring and Gasket
• Zinc Electroplated Steel Screws
• Shrouded Pins
• Color Coded by Voltage
• Walther can produce and supply the mating cable assemblies
NOTE: Also see 232 for a larger backshell to accommodate 5 wire 30A SOO cable sizes
Ordering/Logistics Information
Piece
85366990
0.52 lbs or 0.2377 kg
10
12.21 in or 0.31 m
7.68 in or 0.195 m
5.51 in or 0.14 m
5.57 lbs or 2.525 kg
Conformities
Y
2011/65/EU
2015/863/EU
1907/2006
Part Number 231 | rev 210308 | Page 2
F. WALTHER ELECTRIC CORP | P (732) 537-9201 | F (732) 537-9209 | WWW.WALTHERELECTRIC.COM
Certification
VDE/ENEC certification
40021520
UL certification
E329476
EAC certification
BY112.02.01.020 06090
Technical Product Data
IEC-amperage
32 A
Amperage according to UL/CSA (for UL-version)
30 A
Number of poles and wires
5 = 3P+N+G
Voltage according to EN 60309-2
400 V (50+60Hz)
Clock hour position
6 h
Identification color
Red
Conductor Cross Section
2.5 – 6 mm
2
Cable Diameter
0.39 in – 0.89 in or 10 mm - 22.5 mm
Cable Strip Length
1.77 in +/- 0.10 in or 45 mm +/- 2.5 mm
Cable Ferrules Length
0.39 in +/- 0.04 in or 10 mm +/- 1mm
Maximum torque terminal screw
0.8 Nm
Maximum torque cable gland
4 Nm
Degree of protection (IP)
IP44
Connection system
Screwed Terminal
Contact material
Nickel-Plated Brass
Cable entry
Swivel
Angle of plug
Straight
Material
Plastic
Inflammability class of insulation material according to UL94
V2
All specifications are subject to change without notice. Consult a Walther Electric Engineer for the latest
specifications or speak with a member of our Customer Care Team +1 (800) 925-8437.