Q-1
Q
Digital High Voltage
Insulation Tester
HHM-380395
U Test Voltages of 500V,
1000V, 2500V, and 5000V
U Measure Insulation
Resistance to 60G Ω
U Large 6000 Count
Display with Bargraph
and Backlight
U Polarization Index
Measurement (PI)
U Dielectric Absorption
Ratio Measurement (DAR)
U AC/DC Voltage
Measurement from 0 to
600V with Max/Min, Peak
and Relative Functions
U 1 to 15 Minute
Timer Function for
Insulation Resistance
Measurements
U Resistance Measurement
U Indication of
Output Voltage and
Discharge Voltage
U Auto-Discharge Function
and Voltage Output
Warning Function
U Autoranging, Auto
Power-Off and
Battery Check
The HHM-380395 meter provides
four insulation resistance test
ranges plus continuity, AC/
DC voltage, polarization index
and dielectric absorption ratio
measurements. This meter is
shipped fully tested and calibrated,
with proper care and use, will
provide years of reliable service.
Specifications
Display: 6000 count LCD display with
bargraph
Sampling Rate: 2.5 times per second
Over Range Indication: “OL” appears
on the LCD
Short Circuit Current: >200 mA
Open Circuit Test Voltage: >4.5V
Low Battery Indication: Battery
symbol appears on the LCD
Power Supply: Eight (8) 1.5V “C” cell
batteries (included) or 13.5V 1A AC
adaptor
Fuse: 500 mA/600V (6 x 32 mm)
ceramic 3AG fast blow
Auto Power Off: After approximately
20 minutes of inactivity
Comes complete with test leads, 8 C batteries, AC adaptor, and heavy-duty carrying case and operator’s manual.
Ordering Example: HHM-380395, digital high voltage insulation tester.
To Order Visit omega.com/hhm-380395 for Pricing and Details
Model No. Description
HHM-380395 Digital high voltage insulation tester
Operating Temperature: 0 to 40°C
(32 to 104°F)
Operating Humidity: < 80% RH
Altitude: Up to 2000 meters
(6562 feet)
Storage Temperature: -10 to 60°C
(14 to 140°F )
Storage Humidity: < 80% RH
Dimensions: 198 H x 148 W x 86 mm
Diameter (7.8 x 5.8 x 3.4")
Weight: Approx. 1438 g (50.7 oz)
with battery
Safety Standards/Ratings: Pollution
degree 2, meets IEC 61010-1 and
IEC 61010-031
Category Rating: CAT IV 600V
HHM-380395
shown smaller
than actual size.
Test leads and heavy-duty carrying
case included with the HHM-380395.
Ideal for testing motors.