3-349-400-03
4/12.10
GMC-I Messtechnik GmbH
SECUTESTSI
Memory and Input Module
Applications
The SI (Storage Interface) module SECUTESTSI is a special
accessory for the test instruments of the SECUTEST.../
SECULIFE ST, PROFITEST 204 and METRISO 5000 D-PI series.
It is installed in the lid of the test instrument and fastened with two
knurled screws.
The test results determined with the test instruments are directly
transferred to the SI module via the RS232 interface.
The test results can be saved on site with the respective time and
date in the form of clear and document-safe measuring and test
protocols.
Transmission of stored data to the PC (only SECUTEST.../SECULIFE ST)
The SI module is equipped with an RS232 interface. The interface
allows for subsequent uploading of stored data to a PC indepen-
dent of the test instrument, where they can be processed with the
ETC, PS3, PC.doc-WORD/EXCEL, PC.doc-ACCESS,
ELEKTROmanager, PROTOKOLLmanager oder PATmanager
software programs.
Barcode or RFID scanner option (only SECUTEST.../SECULIFE ST)
Barcode or RFID scanner (accessory) can be linked to the RS232
connection of the SI module. The information available in the form
of barcodes or RFID tags can be safely integrated in the test pro-
tocols in an efficient and easy manner. This kind of data input
enables the user to record substantial data quantities in a timesa-
ving and cost-effective manner, e.g. for series measurements of
instruments provided with barcodes or RFID tags.
Comparison of Memory Adapters / Testers with memory option
* only function when used with PROFITEST 204 und METRISO 5000 D-PI
Features
SECUSTORE (Z745U)
SECUTESTSI (M702F)
SECUTEST SI+ (M702G)
SECUTEST
‚
PSI (GTM5016000R0001)
SECUTEST SIII+. . . Feature KB01
SECULIFE ST
SECUTEST S2N+ Option DBmed
Integrated printer for recording charts — — — ——
Annotations via keyboard — ——
Data memory (flash) —————
Data memory (battery buffered) —
Protocol functions ——
Statistical evaluation of up to 8 instrument classes — ——
Data transmission to PC via RS232-Interface
Data transmission to PC via USB-Interface — — ———
Connection of a barcode scanner
Connection of an RFID scanner
Storage of function test values ——
Storage of comments on DUT — ——
• Real-time clock with date function
battery buffered
• Data memory (only SECUTEST.../SECULIFE ST)
Measurement values can be stored for up to 500 protocols
• Alphanumeric keyboard
Test results can be annotated for the SECUTEST.../
SECULIFE ST, METRISO 5000 D-PI and PROFITEST 204 test
instruments, e.g. specific data on
system, DUT, customer and repair
SECUTESTSI
Memory and Input Module
2 GMC-I Messtechnik GmbH
Applicable Regulations and Standards
Data Memory (only SECUTEST.../SECULIFE ST)
RAM (Data) 100 kByte
up to 500 tests, depending on
the scope of master data
Real-time clock
with date function buffered by a permanently installed
lithium battery
Data Interface
Type RS232, serial, per DIN 19241
Baudrate 9600 bauds
Parity No
Data bits 8
Stop bit 1
Reference Conditions
Auxiliary power 9 V 0.5 V DC or
8V 0.5 V rectified
Ambient
temperature +23 C 2K
Relative humidity 40 ... 60%
Ambient Conditions
Operating temperature
0 C ... 40 C
Storage temperature - 20 °C ...+ 60 °C; except batteries
Relative humidity max. 75%, no condensation allowed
Elevation max. 2000 m
Deployment indoors
Auxiliary power
Voltage Supply
for connection to
the test instruments via pin 9 of the RS232 interface
6.5 V ... 12 V, typically 9 V
Mechanical Configuration
Protection IP20 for the housing
Dimensions 240 mm x 81 mm x 40 mm
(without knurled screws and ribbon cables)
Weight approx. 0.4 kg
Scope of Supply
1 SI module
1 Operating instructions
The interface description is available on our website www.gos-
senmetrawatt.com.
Accessories
see order information
IEC/EN 61 010-1:2001
VDE 0411-1:2002
Safety requirements for electrical measurement, control
and laboratory devices – General requirements
DIN EN 60 529/
VDE 0470 Part 1
Test instruments and test procedures,
protection provided by enclosures (IP code)
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and labo-
ratory use – EMC requirements – Part 1: General re-
quirements