160
1.11
Date of issue: December 2021
Add items to your watchlist!
www.HT.click/9-160?q=2
Cable Ties and Fixings
Fixing products for weld studs
Many industries (but specifically the automotive market) are using
weld studs as the standard method of attaching components. Simply
hammered onto the stud these parts provide ideal fixing bases for
attaching cables, pipes or hose.
The use of weld studs avoids the problems with holes (ingress of
moisture, corrosion etc).
Features and benefits
• Simple and quick method of fixing
• SBH types simply hammered onto the stud
• SBH1 and SBH3 allow cables to run across the panel
• SBH2 allow cables to run at 90° to the panel
Fixing elements for weld studs
SBH2 allow cables to run at 90° to the panel.
SB-Series
SBH1, SBH3 SBH1, SBH3
TYPE
Width
(W)
Length
(L)
Length
(L2)
Height
(H)
Height
(H2)
Stud
Ø
Strap Width
max.
(G) Material Colour Article-No.
SBH1 12.5 26.8 9.0 13.9 15.9 5.0 8.5 PA66 Black (BK) 151-02260
SBH3 12.5 26.8 9.0 18.0 15.9 5.0 8.5 PA66 Black (BK) 151-02279
SBH2 12.5 26.8 9.0 14.0 12.5 5.0 8.5 PA66 Black (BK) 151-26250
All dimensions in mm. Subject to technical changes.
In areas with limited space these mounting bases allow the cable
to be slightly offset from the fixing stud, and can be installed in the
equipment prior to the cable installation. A major cost saving can be
made using these products as they will allow the use of many different
sizes of standard cable ties without the need to stock a wide range of
specific fixing ties.
Features and benefits
• Ideal for cable ties up to 4.8 mm wide
• Simply pushed by hand onto an ISO or Fir Tree stud
Fixing elements for weld studs
Fixing Element CTMS5 allows bundles to be routed alongside the stud.
CT-Series
CTMS5CTMS5
TYPE
Width
(W)
Length
(L)
Height
(H)
Height
(H2)
Stud
Ø
Strap Width
max.
(G) Material Colour Article-No.
CTMS5 10.0 19.0 14.5 5.3 5.0 5.0 PA66 Black (BK) 151-03301
All dimensions in mm. Subject to technical changes.
SBH1, SBH3
SBH2
SBH2
26
1.0
Date of issue: December 2021
Further information at www.HellermannTyton.com/fixings
Material Specification Overview
Cable Ties and Fixings
Material Information
MATERIAL
Material
Shortcut
Operating
Temperature Colour** Flammability Material Properties*
Material
Specifications
Aluminium alloy AL -40 °C to +180 °C Natural (NA)
• Corrosion resistant
• Antimagnetic
Chloroprene Rubber CR -20 °C to +80 °C Black (BK)
• Weather resistant
• High yield strength
Ethylene
Tetrafluoroethylene
(Tefzel
®
)
E/TFE -80 °C to +170 °C Blue (BU) UL 94 V0
• Resistance to radioactivity
• UV resistant, not moisture sensitive
• Good chemical resistance to acids,
bases, oxidizing agents
Polyacetal POM
-40 °C to +90 °C,
(+110 °C, 500 h)
Natural (NA) UL 94 HB
• Limited brittleness sensitivity
• Flexible at low temperature
• Not moisture sensitive
• Robust on impact
Polyamide 11 PA11
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Bio-plastic, derived from vegetable oil
• Strong impact resistance at low
temperature
• Very low moisture absorption
• Weather resistant
• Good chemical resistance
Polyamide 12 PA12
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Good chemical resistance to acids,
bases, oxidizing agents
• UV resistant
Polyamide 4.6 PA46
-40 °C to +130 °C,
(+150 °C, 5000 h;
+195 °C, 500 h)
Natural (NA),
Grey (GY)
UL 94 V2
• Resistance to high temperatures
• Very moisture sensitive
• Low smoke sensitivity
Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL 94 V2 • High yield strength
Polyamide 6,
high impact modified
PA6HIR -40 °C to +80 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6 PA66
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK),
Natural (NA)
UL 94 V2 • High yield strength
Polyamide 6.6,
glass-fibre reinforced
PA66GF13 -40 °C to +105 °C Black (BK) UL 94 HB
• Good resistance to lubricants, fuels,
salt water and solvents
Polyamide 6.6,
heat and UV-stabilised
PA66HSUV -40 °C to +105 °C Black (BK) UL 94 V2
• High yield strength
• Modified elevated maximum
temperature
• UV resistant
Polyamide 6.6,
heat stabilised
PA66HS -40 °C to +105 °C
Black (BK),
Natural (NA)
UL 94 V2
• High yield strength
• Modified elevated maximum
temperature
Polyamide 6.6,
high impact modified
PA66HIR
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6,
high impact modified,
heat and UV-stabilised
PA66HIRHSUV -40 °C to +110 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated maximum
temperature
• High yield strength, UV resistant
Polyamide 6.6,
high impact modified,
heat stabilised
PA66HIRHS -40 °C to +105 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated maximum
temperature
Polyamide 6.6,
high impact modified,
scan black)
PA66HIR(S)
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6,
UV-resistant
PA66W
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 V2
• High yield strength
• UV resistant