190
1.12
Date of issue: December 2021
Add items to your watchlist!
www.HT.click/9-190?q=2
For product specific approvals and specifications please refer to the Appendix.
Cable Ties and Fixings
Fixing products for screws
Many applications require each cable run to be firmly held in place
but to be held separately from adjacent cable runs (example - control
cabinets, machinery and military systems). The MP series of mounts can
achieve this.
Features and benefits
• Allow multiple cables to run in parallel
• Simple to fix with two screws
• Cables are fixed by using a cable tie through any combination of the
available slots
Mounting plates for screw fixing
Screwable mounting plate MSMP.
MP-Series for parallel bundling
Mounting plates in application
Mounting plates MP and MSMP (plan and side view)
FH
H
TYPE
Width
(W)
Length
(L)
Height
(H)
Hole Ø
(FH)
Strap Width
max.
(G)
No. of
bundles Material Colour
Pack
Cont. Article-No.
MP2M3 12.7 76.2 3.2 3.7 5.2 2 PA66 Natural (NA) 100 pcs. 151-24219
MP3M3 12.7 108.0 3.2 3.7 5.2 3 PA66 Natural (NA) 100 pcs. 151-24319
MP4M3 12.7 139.8 3.2 3.7 5.2 4 PA66 Natural (NA) 100 pcs. 151-24419
MSMP5/10 15.8 204.5 5.3 5.1 7.6 5 PA66 Natural (NA) 100 pcs. 151-25519
MSMP6/6 15.8 244.0 5.3 3.8 7.6 6 PA66 Natural (NA) 100 pcs. 151-25619
MSMP4 15.9 167.0 5.2 5.1 8.2 4 PA66 Natural (NA) 500 pcs. 150-83499
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available.
Material specification
please see page 26.
26
1.0
Date of issue: December 2021
Further information at www.HellermannTyton.com/fixings
Material Specification Overview
Cable Ties and Fixings
Material Information
MATERIAL
Material
Shortcut
Operating
Temperature Colour** Flammability Material Properties*
Material
Specifications
Aluminium alloy AL -40 °C to +180 °C Natural (NA)
• Corrosion resistant
• Antimagnetic
Chloroprene Rubber CR -20 °C to +80 °C Black (BK)
• Weather resistant
• High yield strength
Ethylene
Tetrafluoroethylene
(Tefzel
®
)
E/TFE -80 °C to +170 °C Blue (BU) UL 94 V0
• Resistance to radioactivity
• UV resistant, not moisture sensitive
• Good chemical resistance to acids,
bases, oxidizing agents
Polyacetal POM
-40 °C to +90 °C,
(+110 °C, 500 h)
Natural (NA) UL 94 HB
• Limited brittleness sensitivity
• Flexible at low temperature
• Not moisture sensitive
• Robust on impact
Polyamide 11 PA11
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Bio-plastic, derived from vegetable oil
• Strong impact resistance at low
temperature
• Very low moisture absorption
• Weather resistant
• Good chemical resistance
Polyamide 12 PA12
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Good chemical resistance to acids,
bases, oxidizing agents
• UV resistant
Polyamide 4.6 PA46
-40 °C to +130 °C,
(+150 °C, 5000 h;
+195 °C, 500 h)
Natural (NA),
Grey (GY)
UL 94 V2
• Resistance to high temperatures
• Very moisture sensitive
• Low smoke sensitivity
Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL 94 V2 • High yield strength
Polyamide 6,
high impact modified
PA6HIR -40 °C to +80 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6 PA66
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK),
Natural (NA)
UL 94 V2 • High yield strength
Polyamide 6.6,
glass-fibre reinforced
PA66GF13 -40 °C to +105 °C Black (BK) UL 94 HB
• Good resistance to lubricants, fuels,
salt water and solvents
Polyamide 6.6,
heat and UV-stabilised
PA66HSUV -40 °C to +105 °C Black (BK) UL 94 V2
• High yield strength
• Modified elevated maximum
temperature
• UV resistant
Polyamide 6.6,
heat stabilised
PA66HS -40 °C to +105 °C
Black (BK),
Natural (NA)
UL 94 V2
• High yield strength
• Modified elevated maximum
temperature
Polyamide 6.6,
high impact modified
PA66HIR
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6,
high impact modified,
heat and UV-stabilised
PA66HIRHSUV -40 °C to +110 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated maximum
temperature
• High yield strength, UV resistant
Polyamide 6.6,
high impact modified,
heat stabilised
PA66HIRHS -40 °C to +105 °C Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated maximum
temperature
Polyamide 6.6,
high impact modified,
scan black)
PA66HIR(S)
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL 94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6,
UV-resistant
PA66W
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL 94 V2
• High yield strength
• UV resistant