3691194a 1 02.23.21
Lighting Control Systems DIN Rail Panel Power Equipment
®
SPECIFICATION SUBMITTAL
Job Name:
Job Number:
Model Numbers:
Configurable lighting control panels are pre-assembled and tested power panels that are
configurable to control multiple load types. Safe panel design offers ease of use with a
separate control equipment compartment for link management and interfacing with
other systems.
Features
• Integral Athena Edge processor available
• Able to connect to other DIN rail panels, Athena hubs (QP5; QP6),
or Edge processors in enclosure by others
• Supports up to 10 total QSNE DIN power modules (DPMs):
– Switching
– PRO LED
+
phase adaptive power module
– 0–10 V- dimming control*
– DALIR Universal
– Motor loads
• IEC PELV/SELV control section to can have up to two of the following:
– Network interface (QSE-CI-NWK-E)
– Contact Closure interface (QSE-IO)
– DMX interface (QSE-CI-DMX)
– Athena Edge processor (QP-*)
• Panels are pre-wired and tested prior to shipping
• Panels are rated for 220–240 V~ and 230 V~ (CE) applications
• Feed-through, MCB, or RCBO panels available
• Allows for integration of wired and wireless sensors and controls
• Integrates with Lutron QS devices
• Integrates with Lutron Sivoia QS motorized shades
• Scalable from a single area or floor; to a building or whole campus
• Integral manual override switch turns all lights on to a programmable level when activated
(for all modules except motor module and QSE-CI-4M module)
• Bypass jumpers included for load mis-wire protection
• Panels are available in two sizes: 1 613 mm (63.5 in) and 921 mm (36.3 in) tall
• Front cover with vents to maximize thermal performance included
• Optional black, powder-coated doors available for all panels:
– Reversible, hinged door with magnetic latch
– Locking hinged door available upon request
• Schneider ElectricR breakers are used in MCB and RCBO versions
Note: See page 20 for a list of complete specification submittals
* Maximum of 10 A total in an RCBO panel
1 613 mm
(63.5 in)
panel
921 mm
(36.3in)
panel
Athena DIN Rail Panel
DL
DL
DL
DL
L
N
N
N
N
N
DL
DL
DL
DL
L
N
N
N
N
N
1
1
2
2
3
3
4
4
DL
DL
DL
DL
L
N
N
N
N
N
+1
-1
+2
-2
+3
-3
+4
-4
L1
V+
COM
L2
COM
CCI
V+
COM
MUX
MUX
0,28 in
7 mm
4,4 in-lb
0,5 N
•
m
V+
COM
MUX
MUX
===LED|DEL
QP-2L
Athena Edge Processor
24-36 V- 250 mA SELV NEC® Class 2
lutron.com +1.844.LUTRON1
+44.(0)20.7702.0657
L1: 24 V- 1.0 A L2: 24 V- 1.0 A
Def
1
2
3
Opt
Tc>70˚C
Prog
Input
Entrada
Entrée
QSNE-4A5-230-D
CCI
H
M
L
lutron.com
Zn 1Zn 2
Zn 3
Zn 4
220-240 V~ 50 / 60 Hz 10 A
+44.(0)20.7702.0657
Def
1
2
3
Opt
Tc>70˚C
Prog
Input
Entrada
Entrée
QSNE-4A5-230-D
CCI
H
M
L
lutron.com
Zn 1Zn 2
Zn 3
Zn 4
220-240 V~ 50 / 60 Hz 10 A
+44.(0)20.7702.0657
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
L N
1
1
2
2
3
3
4
4
QS
8 mm
0,5 N∙m
N1771
Z096
®
MUX
COM
DA 1 DA 2
L N
CCI
Emergency
R
MUX
Energi Savr Node forDALI Type-8
QSN-2DALUNV-D
COM
CCI
COM
243C
IND.CONT.EQ.243C
IND.CONT.EQ.
+44.(0)20.7702.0657
+1.844.LUTRON1120 V~ 50/60 Hz 120 mA
230 V~ 50/60 Hz 80 mA
lutron.com
+91.124.4390130
Ta ≤ 65 °C 60/75 ºC
Cu
Al
0.31 in5.0 in-lb (0,6 N•m) (8,0 mm)
Test | Prueba
Tester
Ta > 65 ºC
NEC
®
Class 2
NEC
®
Class 2
IEC PELV
Test
Power
Hi Temp
Ethernet DALI 1
DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
L
N
1
1
2
2
3
3
4
4
QS
8 mm
0,5 N
∙
m
N1771
Z096
®
MUX
COM
DA 1
DA 2
L
N
CCI
Emergency
R
MUX
Energi Savr Node forDAL
I Type-8
QSN-2DALUNV-D
COM
CCI
COM
2
4
3
C
I
ND
.
C
O
N
T
.
E
Q
.2
4
3
C
I
N
D
.
C
O
N
T
.
E
Q
.
+44.(0)20.7702.0657
+1.844.LUTRON1
120 V
~
50
/60 Hz 120 mA
230 V
~ 50
/60 Hz 80 mA
lutron.com
+91.124.4390130
Ta ≤ 65 °C 60/75 ºC
Cu
Al
0.31 in
5.0 in-lb (0,6 N•m)
(8,0 mm)
Test | Prueba
Tester
Ta > 65 ºC
NEC
®
Class 2
NEC
®
Class 2
IEC PEL
V
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
+1
+1
-1
-1
+2
+2
-2
-2
+3
+3
-3
-3
+4
+4
-4
-4
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
+1
+1
-1
-1
+2
+2
-2
-2
+3
+3
-3
-3
+4
+4
-4
-4
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
DL
DL
DL
DL
DL
DL
DL
DL
L
L
N
N
N
N
N
N
N
N
N
N
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
L1
V+
COM
L2
COM
CCI
V+
COM
MUX
MUX
0,28 in
7 mm
4,4 in-lb
0,5 N
•
m
V+
COM
MUX
MUX
===LED|DEL
QP-2L
Athena Edge Processor
24-36 V- 250 mA SELV NEC® Class 2
lutron.com +1.844.LUTRON1
+44.(0)20.7702.0657
L1: 24 V- 1.0 A L2: 24 V- 1.0 A
Def
1
2
3
Opt
Tc>70˚C
Prog
Input
Entrada
Entrée
QSNE-4A5-230-D
CCI
H
M
L
lutron.com
Zn 1Zn 2
Zn 3
Zn 4
220-240 V~ 50 / 60 Hz 10 A
+44.(0)20.7702.0657
Def
1
2
3
Opt
Tc>70˚C
Prog
Input
Entrada
Entrée
QSNE-4A5-230-D
CCI
H
M
L
lutron.com
Zn 1Zn 2
Zn 3
Zn 4
220-240 V~ 50 / 60 Hz 10 A
+44.(0)20.7702.0657
Def
1
2
3
Opt
Tc>70˚C
Prog
Input
Entrada
Entrée
QSNE-4A5-230-D
CCI
H
M
L
lutron.com
Zn 1Zn 2
Zn 3
Zn 4
220-240 V~ 50 / 60 Hz 10 A
+44.(0)20.7702.0657
QSNE-4S5-230-D
220–240 V~ 50/60 Hz 16 A
+1.844.LUTRON1
+91.124.4390130
+44.(0)20.7702.0657
lutron.com
1234
CCI COM
CCO N.O.
CCO COM
COM
CCI
CCO N.C.
MUX
MUX
Zn. 1 Zn. 2 Zn. 3 Zn. 4
220-240 V~ 5 A
220-240 V~ 5 AX, 1/2 HP
NNNN
M
N
L
M
L
H
MUX
COM
MUX
CCI
COM
Zn 1 Zn 2 Zn 3 Zn 4
Opt
1
2
3
Def
Prog
220-240 V~ 50/60 Hz 50 mA
QSNE-4T10-230-D
0-10 V/Switching Power Module
+1.844.LUTRON1
+44.(0)20.7702.0657
lutron.com
0,6 N
•m
(5.0 in-lb)
(0.31 in)
8,0 mm
Input | En
trada
Entrée
Tc > 65 ºC
0-10 V-
50 mA
220-240 V~ 10 AX ea
4
2
3
1
L N
M
L
H
MUX
COM
MUX
CCI
COM
Zn 1 Zn 2 Zn 3 Zn 4
Opt
1
2
3
Def
Prog
220-240 V~ 50/60 Hz 50 mA
QSNE-4T10-230-D
0-10 V/Switching Power Module
+1.844.LUTRON1
+44.(0)20.7702.0657
lutron.com
0,6 N•m
(5.0 in-lb)
(0.31 in)
8,0 mm
Input | Entrada
Entrée
Tc > 65 ºC
0-10 V-
50 mA
220-240 V~ 10 AX ea
4
2
3
1
L N
Test
Power
Hi Temp
Ethernet
DALI 1
DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
L N
1
1
2
2
3
3
4
4
QS
8 mm
0,5 N∙
m
N1771
Z096
®
MUX
COM
DA 1 DA 2
L
N
CCI
Emergency
R
MUX
Energi Savr Node forDALI Type-8
QSN-2DALUNV-D
COM
CCI
COM
2
43CI
ND
.
CON
T
.EQ.2
43CI
N
D.CO
NT
.EQ.
+44.(0)20.7702.0657
+1.844.LUTRON1120 V~
50/60 Hz 120
mA
230 V
~ 50/60 Hz 80 mA
lutron.com
+91.124.4390130
Ta �� 65 °C 60/75 ºC
Cu
Al
0.31 in5.0 in-lb (0,6 N
•m) (8,0 mm)
Test | Prueba
Tester
Ta > 65 ºC
NEC
®
Class 2
NEC
®
Clas
s 2
IEC PELV
Test
Power
Hi Temp
Ethernet
DALI 1 DALI 2
IR
Photo
Com
20 V
20 V
Com
MUX
MUX
24 V
COM
Occ
IR
Photo
Occ
Energi Savr Node QS
QSNE-2DAL-D
230 V~ 50/60 Hz 100 mA
www.lutron.com
+44.(0)20.7680.4481
L N
1
1
2
2
3
3
4
4
QS
8 mm
0,5 N
∙
m
N1771
Z096
®
MUX
COM
DA
1 DA 2
L N
CCI
Emergency
R
MUX
Energi Savr Node forDALI Type-8
QSN-2DALUNV-D
COM
CCI
COM
2
43CI
ND.CON
T
.EQ.
2
43CI
ND.CO
NT
.EQ.
+44.(0)20.7702.0657
+1.844.LUTRON1120 V~ 50/60 Hz 120 mA
230 V~ 50/60 Hz 80 mA
lutron.com
+91.124.4390130
Ta ≤ 65 °C 60/75 ºC
Cu
Al
0.31 in5.0
i
n-lb (0,6 N
•
m) (8,
0 mm)
Test | Prueba
Tester
Ta > 65 ºC
NEC
®
Class 2
NEC
®
Clas
s 2
IEC PEL
V
1
3691194a 2 02.23.21
Lighting Control Systems DIN Rail Panel Power Equipment
®
SPECIFICATION SUBMITTAL
Job Name:
Job Number:
Model Numbers:
Regulatory Approvals
• CE
• UKCA
Power
• Input: 230 V~ (CE); 220–240 V~ (non-CE) 50/60 Hz
(see panel configuration for input current ratings).
• Lightning strike protection: Meets ANSI/IEEE standard
C62.41-2000 and IEC 61000-4-5. Can withstand voltage
surges up to 6 000V~ and current surges up to 3 000A.
• 10 year power failure memory: restores lighting to
levels prior to power interruption.
• Branch Circuit Breakers: IEC rated
– Current rating: 10A
– Rated residual current (RCBO only): 30mA
– Trip Curve characteristic: Type C
– Additional breaker options available upon request
• Standby power: varies based on configuration. See the
individual module and control equipment specifications
available at www.lutron.com to determine what
standby power a particular panel consumes.
DIN Modules Available
(maximum of 10)
• PRO LED
+
Phase Adaptive
• Switching 5 A max per output
• Switching / 0–10 V-
• Motor
(maximum of 8)
• DALIR Universal
Note: DALIR Universal modules limited to four (4) per
QS Link
Wiring
• Internal: Wired and tested by Lutron.
• System communications: IEC PELV/SELV wiring
connects panels to control station.
• Wired sensors must be wired to QS Sensor
Module (QSM).
• Line (mains) voltage: only feed and load wiring
required (feed-through panels require feeds for the
module power).
Mounting
• Surface- or recess-mount.
Specifications
Construction
• 1.5 mm (16-gauge) galvanized sheet metal enclosure
(unpainted).
• 1.5 mm (16-gauge) powder-coated (black) metal
cover with ventilation holes.
• Optional door: 2.1 mm (14-gauge) powder-coated
(black) metal door with ventilation holes.
Environment
• Enclosure: IP-20 protection.
• Mount where ambient temperature is 0to 40ºC
(32 to 104°F). Relative humidity less than 90%,
non-condensing.
• Indoor use only.
• Passive cooling (fan is not required)
Line Voltage (Mains) Connections
• Use copper wire only, supply conductors 60°C to
75°C (140 °F to 167 °F).
• Feed-through panels
– DIN rail-mounted terminal blocks provided for
line-voltage (mains) power to DPMs and to control
equipment power supply.
– DIN rail-mounted terminal blocks provided for
load wiring.
• MCB and RCBO panels
– Isolator switch provided for line-voltage (mains)
power. Power is distributed to branch circuit
breakers, modules, and control gear via internal
wiring installed by Lutron.
– DIN rail-mounted terminal blocks provided for
load wiring.
Wire Sizing
• DIN rail-mounted terminal blocks:
– Line (mains) and load terminal blocks will accept
one 0.14 mm
2
to 6.0mm
2
(26 AWG to 10 AWG)
wire or two 0.14mm
2
to 1.5 mm
2
(26 AWG to
16 AWG) wires.
– 0–10 V- control signal terminal blocks will accept
one 0.14 mm
2
to 1.5mm
2
(26 AWG to 16 AWG)
wire or two 0.14mm
2
to 0.75 mm
2
(26 AWG to
20 AWG) wires.
• Isolator switches will accept one 2.5 mm
2
–35 mm
2
(12 AWG to 2 AWG) wire per pole.
continued on next page
2