COMPONENTS PRODUCT INFORMATION
CONNECTOR
NEW
1/9
MB-0161-1
September 2006
JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd.
JN6 Series
Small Waterproof Connector
Connecter for brake
1. All plastic ---lightweight, low cost
2. Compact and low profile --- 4 pos.; plug overall length 28mm, plug height 11 .4mm
3. Receptacle attachment --- 4 pos.; molded in to motor
2 pos., 7pos.; crimp attached to motor
4. Connection method --- 4pos. receptacle; board through-hole type
4pos. plug and other 2pos., 7pos.; crimp type
5. Secure mating ---enables secure mating by screw fixing 4points
6. Waterproof ---IP67 class
7. Cable pulling out direction --- selectable from two directions(180 degrees)
<<Outline>> JN6 has been developed for small servo motors following the JN4, JN5 Series.
With 4 power contacts, 2 brake contacts and 7 encoder contacts that are all
reversible in the 180 degree direction.
Compact motor
Features
Connector for encoder
2 pos. for brake
7 pos. for encoder
4 pos. for power
Connecter for power
[Example of use]
MB-0161-1
2/9
JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd.
General Specifications
1) Receptacle
2) Plug
for Power (4pos.) for Brake(2pos.)/ for Encorder ( 7pos.)
1 Rated current 7A max. (per pos.) 1A max. (per pos.)
2 Rated voltage 200VAC 100VAC
3 Withstanding voltage 1500VAC 500VAC
4 Insulation resistance 1000M ohm min. (500V energized) 1000M ohm min. (500V energized)
5 Waterproof IP67 (when mated) IP67 (when mated)
6 Operating temperature -40 to +125 Deg. C -40 to +125 Deg. C
Receptacle: Angle through-hole Receptacle: crimp (AWG#28 to #22)
Plug: crimp (AWG#20 to #18) Plug: crimp (AWG#28 to #22)
8 Plug applicable cable Cable outer dia.: dia.6±0.5 Cable outer dia.: dia.5±0.5
Items
Specification and performan ce
7
Connection
specification
Materials and Finishes
Name of parts Materials Finishes
1 Pin contact Copper alloy Au plating
2 Pin ins ulat or Re sin (black ) -
3 Insert nut (4 pos. only) 4 pos. only: copper alloy
Zinc plating (black chromate finish,
chromium hexavalent free)
Name of parts Materials Finishes
1 Socket contact Copper alloy Au plating
2 Socket insu lator Resin (black) -
3 Hood Resin (black) -
4 Grand nut Resin (black) -
5 Gasket NBR (black) Heat resistant -
6 Bushing NBR (black) Heat resistant -
7 Spring Stainless steel -
8 Screw Steel
Zinc plating (black chromate finish,
chromium hexavalent free)