R&S FSH4/FSH8/FSH13/FSH20 Handheld Spectrum Analyzer
Release Notes
R&S
FSH4/FSH8/FSH13/FSH20
Handheld Spectrum Analyzer
Firmware Release 3.00
These Release Notes describe the following models and options of the R&S
®
Handheld
Spectrum Analyzer:
● R&S
®
Handheld Spectrum Analyzer FSH4, all models
● R&S
®
Handheld Spectrum Analyzer FSH8, all models
● R&S
®
Handheld Spectrum Analyzer FSH13, all models
● R&S
®
Handheld Spectrum Analyzer FSH20, all models
New features in firmware V3.00:
Support for R&S
®
ZN-Z103
SCPI command to retrieve IQ data
EMF Analysis Option:
o Quick Scan mode (scan for signals above a threshold line)
o Spectrum: check acquisition settings validity with a connected
instrument (live editing)
Spectrum Analyzer: FFT based SEM & ACLR for NB-IoT :
Important notes:
If a USB stick is used to update the firmware it needs to be formatted either in
FAT16 or FAT32 format.
Please refer to sections 6.2.3 and 6.2.4 before updating instruments from firmware
version 1.11 or below.
R&S FSH4/FSH8/FSH13/FSH20 Handheld Spectrum Analyzer
Table of Contents
1 New Functions ..................................................................................................... 3
2 Modified Functions .............................................................................................. 5
3 Improvements ...................................................................................................... 6
4 Known Issues....................................................................................................... 8
5 Modifications to the Documentation .................................................................. 8
6 Installation Information ....................................................................................... 9
6.1 General Information ......................................................................................................................... 9
6.2 Firmware Update .............................................................................................................................. 9
6.2.1 Preparing the Installation via SD-Card ............................................................................................... 9
6.2.2 Preparing the installation via USB (instruments with serial numbers above 105000) .....................10
6.2.3 Performing the Firmware Update on the Instrument ........................................................................11
6.2.4 Performing the Self Alignment on the Instrument ............................................................................13
6.3 Installing Firmware Options ..........................................................................................................14
6.3.1 Enabling Options by Entering Option Key Codes ............................................................................14
6.3.2 Enabling Options via the R&S License Manager .............................................................................15
7 Customer Support ............................................................................................. 16