INTRODUCTION
RFE International, Inc. offers a wide range of
chip resistors to meet your application
requirements. They are made with metal
glazed thick film on a high purity ceramic
substrate which is overcoated for stability
and protection.
Page 1 of 5
PART NUMBER EXAMPLE
RESISTANCE CODE
ELECTRICAL CHARACTERISTICS & RESISTANCE RANGE
• Standard Series See RM Series
• Anti-Sulfur Thick Film see RMS Series
• High Power Thick Film see RMH Series
• Anti-Sulfur see RMV Series
• Anti-Sulfur High Power see RMP Series
• Thin Film see RMT Series
• Fusible Resistors see RMF Series
• Thick Film Array Chip see RCN Series
• Metal Array Low-Resistance see LR Series
RMHV 10 R - 10K - J Q
Size Code
Series
Taped & Reeled
Tolerance Code
Resistance Code
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com
SURFACE MOUNT RESISTOR
RoHS
RMHV Series: Triple Power & Anti-Surge
C3BB08
2021.10.01
Blank - Standard
Q = AECQ200
Ohms
Code
1.0 1.5K100 15K 1.0 Meg
1R0 100R 1K5 15K 1M0
F (±1%) J (±5%)
±100 10Ω ~ 1MΩ ---
±200 1Ω ~ 9.76Ω 1Ω ~ 1MΩ
±100 10Ω ~ 1MΩ ---
±150 1Ω ~ 9.76Ω ---
±200 --- 1Ω ~ 1MΩ
±100 1Ω ~ 1MΩ ---
±200 --- 1Ω ~ 1MΩ
Resistance Range
T.C.R.
(PPM/°C)
Code Size
Rated
Power
at 70°C
Max.
Working
Voltage
Max.
Overload
Voltage
RMHV06 (0603) 1/3 W 75V 125V
RMHV10 (0805) 1/2 W 200V 300V
RMHV12 (1206) 3/4 W 250V 500V
DIMENSIONS
D
H
L
C
W
Glass Passivation
L W H C D
RMHV06 (0603) 1.60±0.20 0.80±0.15 0.40±0.10 0.20±0.10 0.20±0.10
RMHV10 (0805) 2.00±0.20 1.25±0.15 0.50±0.15 0.30±0.15 0.40±0.15
RMHV12 (1206) 3.05±0.10 1.60±0.20 0.55±0.15 0.40±0.20 0.50±0.20
Size
Code
Max. Dimension (mm)
SURGE PERFORMANCE CURVE
Page 2 of 5
PERORMANCE CHARACTERISTICS
Power Derating Curve
Power rating or current rating is in the case based on continuous full-load at ambient
temperature of 70ºC. For operation at ambient temperature in excess of 70ºC, the load
should be derated in accordance with figure of derating Curve.
100
80
1
60
40
1
20
1
0
-55 0 20 40 60 70 80 100 120 140 160
155°C
Operating Temperature Range
-55°C to +155°C
Ambient Temperature (°)
Power Ratio (%)
Voltage Rating or Current Rating
Resistance Range: >1Ω
Rated Voltage: The resistor shall have a DC continuous working voltage or a RMS AC
continuous working voltage at commercial-line frequency and wave form
corresponding to the power rating, as determined formula as follows:
E = Rated Voltage (V)
P = Power Rating (W)
R = Nominal Resistance (Ω)
E = √P x R
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com
SURFACE MOUNT RESISTOR
RoHS
RMHV Series: Triple Power & Anti-Surge
0.0001
0.1
1.0
10
100
1000
0.001 0.01 0.1 1.0
RMHV Surge Performance
0603
Peak Power (Watts)
0805
Surge Duration (Sec)
1206
C3BB08
2021.10.01