Transcend's EMC310M embedded MultiMediaCard (e.MMC) integrates flash memory, storage controller, and MMC

interface into a small 153-ball BGA package. The simplified interface makes it extremely compact, facilitating

manufacturing process and effectively shortening time-to-market for end devices. The EMC310M complies with

JEDEC e.MMC 5.1 specification. The top-tier MLC NAND flash delivers high performance and stability. The small

form factor, simplified design, and high speed are ideal for embedded systems, medical devices, infotainment

systems, set-top boxes, and kiosks.

Hardware Features

Complies with JEDEC e.MMC Specification Ver. 5.1 (JESD84-B51A)

I/O (VCCQ) voltage: either 1.7-1.95V or 2.7-3.6V

MLC NAND flash

Core voltage (VCC) 2.7-3.6V

153-ball BGA

Firmware Features

Bus widths supported: x1, x4, x8

Clock frequencies supported: 0~200MHz

Built-in BCH ECC (Error Correction Code) functionality

TRIM command for better performance

Wear-Leveling

Ordering Information

8GB TS8GEMC310M

16GB TS16GEMC310M

e.MMC

EMC310M e.MMC Memory

Embedded Solutions

Specifications

Appearance

Dimensions 11.5 mm x 13 mm x 1.0 mm (0.45" x 0.51" x 0.04")

Form Factor eMMC5.1 (BGA-153)

Bus Speed Mode HS400

Storage

Flash Type MLC NAND flash

Capacity 8 GB / 16 GB

Operating

Environment

Operating Temperature

Standard

-25°C (-13°F) ~ 85°C (185°F)

Storage Temperature -40°C (-40°F) ~ 85°C (185°F)

Humidity 0% ~ 95%

Clock Frequency Supported 0 MHz ~ 200 MHz

Bus Width Supported x1, x4, x8

Performance

Read Speed (Max.) up to 280 MB/s

Write Speed (Max.) up to 100 MB/s

Note

Speed may vary due to host hardware, software, usage, and storage

capacity.

Warranty

Warranty Three-year Limited Warranty

Warranty Policy

Please click here for more information about the Transcend Warranty

Policy.

Due to the complexity and variety of industrial applications, Transcend

cannot guarantee 100% compatibility with all platforms and under all

scenarios. For special applications and environments, it is strongly

suggested that you contact Transcend beforehand for clarification.

Mechanical Dimensions

Product specifications are subject to change without notice. Pictures shown may differ from actual products. Total accessible capacity varies depending on

operating environment. Due to the complexity and variety of industrial applications, Transcend cannot guarantee 100% compatibility with all platforms and

under all scenarios. For special applications and environments, it is strongly suggested that you contact Transcend beforehand for clarification.