Product: 123092A
ControlBus™, Coax RG6, #18 Sol BCCS, PO Ins, QUAD AL Shld, PVC Jkt,
AIA Armor, PVC Jkt, CM
Product Description
ControlBus™, Coax RG6 18AWG (Solid) Bare Copper Covered Steel, PO Insulation, Overall Duofoil®+ Aluminum Braid(60%)+Overall Duofoil®+Aluminum
Braid(40%) Shield, PVC Inner Jacket, Aluminum Interlock Armor, PVC Outer Jacket, CM
Technical Specifications
Product Overview
Suitable Applications:
exposure to rodent, crush, or cut through force, harsh environment, factory automation, ControlNet™, Modbus II, Industrial Coax, Belden ControlNet cables provide maximum signal
integrity and run length exceeding the high-speed, time-critical requirements necessary for ControlNet factory floor applications
Construction Details
RG Type: 6
Conductor
AWG Stranding Nom. Diameter Material
18 Solid 0.0403 in BCCS - Bare Copper Covered Steel
Insulation
Material Nom. Diameter
PE - Polyethylene (Foam) 0.178 in
Inner Jacket Material
Material Nom. Diameter
PVC - Polyvinyl Chloride 0.298 in
Outer Shield Material
Layer Outer Shield Type Material Material Trade Name Coverage
1 Tape Tri-Laminate (Alum+Poly+Alum) Duofoil® 100%
2 Braid Aluminum 60%
3 Tape Tri-Laminate (Alum+Poly+Alum) Duofoil® 100%
4 Braid Aluminum 40%
Armor
Armor Type & Material
AIA - Aluminum Interlock Armor
Outer Jacket Material
Material Nom. Diameter
PVC - Polyvinyl Chloride 0.591 in
Electrical Characteristics
Attenuation
Frequency Nom. Attenuation [dB/100ft]
1 MHz 0.35 dB/100ft
2 MHz 0.38 dB/100ft
5 MHz 0.45 dB/100ft
10 MHz 0.59 dB/100ft
20 MHz 0.86 dB/100ft
50 MHz 1.37 dB/100ft
100 MHz 1.97 dB/100ft
200 MHz 2.82 dB/100ft
300 MHz 3.48 dB/100ft
400 MHz 4.04 dB/100ft
Electricals
Nom. Conductor DCR Nom. Outer Shield DCR Nom. Capacitance Cond-to-Shield Nom. Impedence Nom. Velocity
28 Ohm/1000ft 3.6 Ohm/1000ft 16.2 pF/ft 75 Ohm 82%
Voltage
UL Voltage Rating
300 V RMS
Electrical
Characteristics Notes:
SRL Minimum 23dB (5MHz - 50MHz)
Mechanical Characteristics
Temperature
UL Rating Operating
75°C -40°C To +75°C
Bend Radius
Stationary Min. Installation Min.
7.1 in 2.5 in
Bulk Cable Weight: 142 lbs/1000ft
Max. Pull Tension: 200 lbs
Standards and Compliance
Environmental
Suitability:
Indoor, Outdoor, Sunlight Resistance
Flammability / Fire
Resistance:
UL1685 UL Loading, FT4, 1202
NEC / UL Compliance: Article 800, CL2, CM
CEC / C(UL)
Compliance:
CMG, HL
European Directive
Compliance:
EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC Compliance: China RoHS II (GB/T 26572-2011)
Product Notes
Notes: ControlNet is a ControlNet International trademark.
History
Update and Revision: Revision Number: 0.247 Revision Date: 05-26-2021
© 2021 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without
notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages
(including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief
at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product
Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and
regulations based on their individual usage of the product.