Classification
NAPOPC_CE5 FAQ
No.
1-008-E
Author
Eva
Version
1.0.0
Date
2011/3/11
Page
1/9
ICP DAS Co., Ltd. Technical document
How to configure NAPOPC_CE5 in VP-23W1 with resolution
640 x 480?
The display of VP-23W1 controller is a 3.5" TFT LCD with the resolution of 320 x 240, but the
configuration of NAPOPC_CE5 needs the resolution 640 x 480. In setup steps, user has to
configure the NAPOPC_CE5 of the VP-23W1via the software VCEP in PC remotely.
The steps:
Step 1. Download/Install the NAPOPC_CE5 to VP-23W1
This step can be ignored if there is a new version of NAPOPC_CE5 in VP-23W1 PAC
already.
Step 2. Set up the display to resolution 640 x 480 (VP-23W1 controller site)
The ViewPAC Utility V2.0.2.2 or later version can set up the resolution to 640 x 480. For
the latest version, please download the ViewPAC Utility at the following web site.
http://www.icpdas.com/products/PAC/viewpac/download/viewpac/download_utility.htm
Step 3. Set up the NAPOPC_CE5 in VP-23W1 via the VCEP in the PC (PC site)
Step 1: Download/Install the NAPOPC_CE5 to VP-23W1
1.1 Download the NAPOPC_CE5 for ViewPAC.
Download all files in the folder.
Web site: http://opc.icpdas.com/download.htm#ViewPAC , or ftp site
ftp://ftp.icpdas.com/pub/cd/winpac/napdos/vp-2000_ce50/system_disk/tools/napopc_ce5/ .
Applies to :
Platform
OS version
NAPOPC version
ViewPAC
CE5
NAPOPC_CE5 v2.20
Classification
NAPOPC_CE5 FAQ
No.
1-008-E
Author
Eva
Version
1.0.0
Date
2011/3/11
Page
2/9
ICP DAS Co., Ltd. Technical document
1.2. Create a folder “napopc_ce5” under the directory \System_Disk\Tools\ . Copy all the
files into the new folder.
Step 2: Set up the display to resolution 640 x 480 (VP-23W1 controller site)
2.1 Copy and install ViewPAC utility V2022 or a later version to VP-23W1 under the directory
\System_Disk\Tools\ViewPAC_Utility