Dimensions: [mm]
sectional drawing A-A
Ø ID before shrinkage
Ø ID after shrinkage
t
A
A
Article Table:
Properties Value Unit Tol.
Inner Diameter before shrinkage Ø ID before shrinkage 25.4 mm min.
Inner Diameter after shrinkage Ø ID after shrinkage 12.7 mm max.
t max. after shrinking t 0.95 mm
Properties:
Properties Value Unit Tol.
Material Polyolefine
Color Black
Rate of Shrinking 2:1
Modification of Length after
Shrinking
±5%
Withstanding Voltage 15 kV/mm min.
Shrink Temperature 90 °C min.
Certification:
RoHS Approval Compliant [2011/65/EU&2015/863]
REACh Approval Conform or declared [(EC)1907/2006]
Halogen Free Conform [JEDEC JS709B]
Halogen Free Conform [IEC 61249-2-21]
General Information:
Operating Temperature -55 up to +105 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL) 1
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
JuSa 001.001 2021-10-05 DIN ISO 2768-1m
DESCRIPTION
WA-HST Polyolefine Heat Shrink
Tube
ORDER CODE
71225411
BUSINESS UNIT STATUS PAGE
eiCan Valid 1/4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Reel: [mm]
detail B
N
A
W3
C
B
A
(mm)
C
(mm)
N
(mm)
W
(mm)
Packaging unit Material
Tolerance typ. min. max. + 2,0 m per reel
Value 390,00 30,00 184,00 45,00 30 Paper
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
JuSa 001.001 2021-10-05 DIN ISO 2768-1m
DESCRIPTION
WA-HST Polyolefine Heat Shrink
Tube
ORDER CODE
71225411
BUSINESS UNIT STATUS PAGE
eiCan Valid 2/4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.