NO. MSDS189-2018
1
MATERIAL SAFETY DATA SHEET
物质安全资料表
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 产品和公司资料
PRODUCT NAME: Copper Clad Laminate(S1190)
产品名称：覆铜箔层压板（S1190）
PRODUCT USE: Substrate for printed circuitry ;Multilayer Boards.
用途：用于制作印制电路板；制作多层板
NAME of COMPANY and ADDRESS: SHENGYI TECHNOLOGY CO.，LTD.
No.5 Western Industry Road North Industry District,Dongguan SSL
Sci.&Tech.Industry Park,Dongguan City,Guangdong ,P.R.China
公司名称及地址：广东生益科技股份有限公司;
中国广东省东莞市松山湖科技产业园区北部工业园工业西路 5 号
FOR MORE INFORMATION CALL: IN CASE OF EMERGENCY CALL:
紧急联络电话：(Monday-Friday, 8:00am-5:00pm) (24 Hours/Day, 7 Days/Week)
(0769)22271828(万江)\ 22899388(松山湖) (0769)22271828(万江)\ 22899388(松山湖)
2.HAZARDS IDENTIFICATION 危害性资料
EMERGENCY OVERVIEW:
紧急情况概述：
A nonflammable, sheet material. Dust, when machined or punched may cause skin or eye irritation. Fumes, if
decomposed may irritate eyes, nose, and throat.
是一种难燃的层压板。当使用或打孔时可能产生粉末，可能使皮肤或眼睛感到刺激。当分解时产生的气体会刺激
眼睛、鼻和咽喉。
POTENTIAL HEALTH HAZARDS:
潜在的危害健康的危险品：
SKIN: Dust may cause moderate skin irritation.
皮肤：粉末将导致中等程度皮肤过敏。
EYES: Dust may cause moderate eye irritation. Fumes may irritate eyes.
眼睛：粉末将导致中等程度眼睛过敏。
INHALATION: Fibrous glass dust may be released from the fiber-glass cloth substrate when machined.
吸入物：当使用玻璃布时玻璃纤维粉末可能会��散出。
INGESTION: Not determined.
摄食：没有参考值。
DELAYED EFFECTS: Our product is reinforced with continuous filament fiber glass. Dust generated from the
cutting, grinding, machining, etc., would not be expected to produce respirable particles.IARC
considers continuous filaments as unclassifiable or probably non-carcinogenic.
慢性影响：我们的产品用的是加强型连续的玻璃���维丝。当切割、打孔加工时不会产生可吸入的颗粒。IARC组织
没有将连续型玻璃纤维丝列入致癌目录。
3. COMPOSITION/INFORMATION ON INGREDIENTS 组成成份资料
INGREDIENT NAME CAS # WEIGHT %
成分名称 化学文摘号 重量比
Continuous Filament Fiber Glass (65997-17-3) 30-40
玻纤布
Copper (7440-50-8) 15-30
铜箔
Brominated Epoxy Resin (26265-08-7) 30-60
溴化环氧树脂
4. FIRST AID MEASURES 首要援助措施
SKIN: Wash in flowing water or shower. Remove contaminated clothing.
皮肤：脱下已污染衣服，用流动水冲洗。
EYE: Irrigate with flowing water for 15 minutes. If irritation persists, consult a physician.
眼睛：用流动水冲洗15分钟，如过敏现象持续发生，请求助于医生。
NO. MSDS189-2018
2
INHALATION: If overcome by dust or smoke, move to fresh air. If not breathing, give mouth-to-mouth
resuscitation. Call physician.
吸入：如粉末烟尘太多请转移到有新鲜空气的地方，如没有呼吸，请进行人工呼吸。并致电医生。
INGESTION: If large amounts are ingested, consult physician.
摄食：如吸入大量，请致电医生。
ADVICE TO PHYSICIAN: Treat symptomatically
建议医生：处���出现的症状。
5. FIRE FIGHTING MEASURES 火灾测试
FLAMMABLE PROPERTIES: N/A
易燃烧性：不适用
FLASH POINT: N/A
闪点：不适用
FLASH POINT METHOD: N/A
闪点方式：不适用
AUTOIGNITION TEMPERATURE: Not determined
自燃点温度：无规定
UPPER FLAME LIMIT (Volume % in air): N/A
燃烧上限：不适用
LOWER FLAME LIMIT (Volume % in air): N/A
燃烧下限：不适用
FLAME PROPAGATION RATE (Solids): UL V-O
燃烧等级：UL V-O
OSHA FLAMMABILITY CLASS: N/A
OSHA 燃烧级别：不适用
EXTINGUISHING MEDIA: Water, CO2 and dry chemical
灭火介质：水、CO2及干化学品
UNUSUAL FIRE AND EXPLOSION HAZARDS: May give off toxic hydrogen bromide when thermally
decomposed.
不正常火灾及爆炸危险：当发生热分解时可能会释放出有毒的溴化氢。
SPECIAL FIREFIGHTING PRECAUTIONS/INSTRUCTIONS:
特别火灾指导：
Firemen should wear proper protective equipment and positive pressure self-contained breathing apparatus.
消防员须身穿保护装置及正压呼吸设施。
6. ACCIDENTAL RELEASE MEASURES 意外事故的应变措施
IN CASE OF SPILL OR OTHER RELEASE: (Always wear recommended personal protection equipment)
如有泄漏或其他释放：（通常身穿所推荐的保护设施）
Not applicable, material is an article.
不适用于固体材料。
Spills and releases may have to be reported to local authorities.
有关泄漏应报告当地政府。
7. HANDLING AND STORAGE 仓贮指南
NORMAL HANDLING: (Always wear recommended personal protective equipment.)
规范指南：（建议穿戴个人防护设施）
The primary exposure route is inhalation of dust when machine/punched
or from fumes or vapors when heated.
主要是预防暴露部位吸入当机器打孔时或冒烟、气化液体受热时所产生的粉尘。
STORAGE RECOMMENDATIONS: N/A
贮存建议：不适用。
8. EXPOSURE CONTROLS/PERSONAL PROTECTION 泄漏控制/个人保护
ENGINEERING CONTROLS: Use local exhaust ventilation to control dust.
工程控制：使用当地除尘通风设施。