Classification System and Application FAQ on WinCE PAC No. 2-023-00
Author Tunglu-Yu Version 1.0.0 Date 2013/05/16 Page Author
ICP DAS Co., Ltd. Technical document
How to assign specified application program to function key
on VP-2xWx
The VP-23W1 and VP-25W1 have 6 function key F1 ~ F6 to be set to run specified application
programs. Please follow the steps below to perform settings:
Step1: Execute ViewPAC Utility, it needs the version 2.0.1.5 and later.
Step2: On the “Key property” tab, press the “…” button after the Fn to select the program, and
check the Enable checkbox near the “…” button to enable the function.
Step3: Click the “Setting” button.
Step4: Click “Save and Reboot” from File menu.
Step2
Step3
Step4
Applies to:
Platform OS version WinPAC/ViewPAC utility version
WP-8x3x/ WP-8x4x N/A N/A
VP-25W1 V1.1.0.1 and later V2.0.1.5 and later
VP-23W1 V1.1.0.2 and later V2.0.1.5 and later
VP-4131 N/A N/A
N/A: Not applicable to this platform and OS.
Classification System and Application FAQ on WinCE PAC No. 2-023-00
Author Tunglu-Yu Version 1.0.0 Date 2013/05/16 Page Author
ICP DAS Co., Ltd. Technical document
Revision History
Revision Date Description
1.0.0 2013/05/16 Initial release