HOLLYLAND (CHIN A) ELECTRONICS
TECHNOLOGY CORPORATION LIMITED.
PRODUCT
SPECIFICATION
ISSUED DATE：
REV. NO.：
DOC. NO.：
PAGE ：
2012/2/22
A02
HLD-PSI-447
Page 1 of 3
HC101A FUSEHOLDER
RoHS
制 定
PREPARED BY
2012-2-22
审 核
CHECKED BY
2012-2-22
批 准
APPROVED BY
2012-2-22
1. 适用范围/ SCOPE
本规格书适用于本公司生产的
并获得
UR/CUR
认证的
HC101A RoHS HOLLY
商标的熔断器座。
This specification defines the technical requirements of fuseholders having cylindrical contact caps type HC101A
RoHS with HOLLY
brand which have been approved by UR/CUR.
产品部件号为： 型号
极数 安装方式
Construction of part no:
type No. of poles usage mode
例如 For Example: HC10 1 A
* 安装方式 A usage mode A： 双金属圆柱形触头同向安装 Contact on two cylindrical
2．相关标准及认证情况 APPLICABLE STANDARDS & APPROVED DETAILS
2.1 HC101A RoHS 系列产品适用的相关标准是 UL 4248.1
Applicable standards for HC101A RoHS series are UL4248.1.
2.2
认证情况
APPROVED DETAILS
额定电压
Rated Voltage
URL
／
CUR
备注
Remark
认证范围
Approved Range
认证号码
Cert. No.
600V AC
30A E346660
圆形预绝缘端子
Pressure wire connector terminal.
20A E346660
快速接线端子
Quick connect terminal.
3．公司地址 ADDRESS
中国福建省厦门市湖里区枋湖路 9-19 号
NO. 9-19, FANGHU ROAD, HULI, XIAMEN, FUJIAN, CHINA.
4. 结构 STRUCTURE
4.1 构造图 CONSTRUCTION FIG. & DIMENSION
4.2 使用对象 USE OBJECT
本产品适用于 10.3mm×38mm 圆筒帽形熔断体。
Applicable to 10.3mm×38mm cylindrical contact caps
23.5±1
30.5±1
21.5±1
76±1
5.0
1
2
3
4
6
5
40±1
HOLLYLAND (CHIN A) ELECTRONICS
TECHNOLOGY CORPORATION LIMITED.
PRODUCT
SPECIFICATION
ISSUED DATE：
REV. NO.：
DOC. NO.：
PAGE ：
2012/2/22
A02
HLD-PSI-447
Page 2 of 3
HC101A FUSEHOLDER
RoHS
4.3 原材料规格 MATERIAL
序号 NO. 品名 PART 材料 MATERIAL 备注 REMARK
1 壳体 Base
工程塑料
Plastic
/
2 管夹 Clip
磷青铜
Phosphor bronze
镀锡≥3μm
Tin plated：��3μm
3 平垫圈 FLAT WASHER 钢 Steel
/
4
弹簧垫圈
SPRING WASHER
钢 Steel /
5 M4 盘头螺钉 Screw 钢 Steel
6 M5 盘头螺钉 Screw 钢 Steel /
4.4 熔断器座外观 FUSE HOLDER APPEARANCE
熔断器座无破裂、缺损或污染等现象。
Fuse holder shall have no defects such as crack, injury and contamination.
4.5 塑料件阻燃性能/ FLAMMABILITY CIASSIFICATION: UL 94V-0.
5. 主要技术参数：
额定工作电压 Rated Voltage 600V AC
额定工作电流 Rated Current
30A
圆形预绝缘端子
Pressure wire
Connect terminal
.
20A
快速接线端子
Quick connect terminal.
耐受额定值 Withstand Rating
100,000A rms sym
配用绝缘导线要求
With the insulation
material requirements
尺寸Size
10WG(5.3mm
2
)
材料Material
Cu Only
温度 Temperature 75℃ Min.
安装力矩Torque 20lb.in(2.3N.m)
6. 绝缘性能Dielectric strength：
验证绝缘性能的试验电压应施加在The test voltage for the verification of the insulating properties shall be applied：
6.1.
在带电金属部件和非载流部件之间；
Between live parts and non-current carrying metal parts;
6.2. 接线端子之间：Between the terminals;
6.3.
带电部件与接地之间：
Between live parts and ground;
6.4. 在接线端子和壳体之间；Between the terminal and the base
6.5. 带电部件与安装面之间；between live parts and mounting surface.
试验电压应逐渐增加至2200V AC，并维持1分钟。在试验过程中，不应出现绝缘击穿。the test voltage shall be
applied progressively to 2200Vac and maintained for 1 min. Throughout the application of the test voltage, there
shall be no breakdown of insulation.
7
、机械强度
Mechanical strength
当导线连接器固定
10AWG
的导线并施加标志在熔断器座上力矩值的
110%
时，不能引起熔断器座断裂、变形和损坏。
The base of a fuseholder shall not be damaged when the wire connectors securing short lengths of the 10