SGM7SZ04
Small Logic Inverter
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021 – REV. A. 3
GENERAL DESCRIPTION
The SGM7SZ04 is a single inverter with the advanced
CMOS technology. The supply voltage pin of this
device accepts any voltage from 1.65V to 5.5V. The
inputs can tolerate a maximum of 6V, regardless of the
supply voltage range. When V
CC
is at 0V, the inputs and
output are in the high-impedance state.
This device can achieve ultra-high speed operation with
high output drive, while the low static power dissipation
over the wide supply voltage operating range is
maintained.
The SGM7SZ04 is available in Green UTDFN-1.45×1-6L,
SC70-5 and SOT-23-5 packages. It operates over an
ambient temperature range of -40℃ to +125℃.
FEATURES
● Wide Supply Voltage Range: 1.65V to 5.5V
● Ultra-High Speed: t
PD
of 4.2ns (TYP) into 50pF at
V
CC
= 3.3V
● Support LCX Performance at V
CC
= 3.3V
● High Output Drive: ±24mA at V
CC
= 3V
● Inputs Over-Voltage Tolerance Makes 5V to 3V
Translation Available
● Power Down High-Impedance Inputs/Output
● Available in Green UTDFN-1.45×1-6L, SC70-5
and SOT-23-5 Packages
LOGIC SYMBOL
A
Y
FUNCTION TABLE
INPUT OUTPUT
A Y
L H
H L
Y =
A
H = High Voltage Level
L = Low Voltage Level
SGM7SZ04 Small Logic Inverter
2
SEPTEMBER 2021
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM7SZ04
SC70-5
-40℃ to +125℃
SGM7SZ04XC5G/TR SF3XX Tape and Reel, 3000
SOT-23-5
-40℃ to +125℃
SGM7SZ04XN5G/TR SF4XX Tape and Reel, 3000
UTDFN-1.45×1-6L
-40℃ to +125℃
SGM7SZ04XUDL6G/TR TCX Tape and Reel, 5000
MARKING INFORMATION
NOTE: X = Date Code. XX = Date Code.
SC70-5/SOT-23-5
UTDFN-1.45×1-6L
Date Code - Year
Date Code - Month
Serial Number
YYY X X
Date Code - Year
Serial Number
YY X
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage Range,
V
CC
.................................. -0.5V to 6V
DC Input Voltage Range, V
IN
............................... -0.5V to 6V
DC Output Voltage Range, V
OUT
.......................... -0.5V to 6V
DC Input Diode Current, I
IK
(V
IN
< -0.5V) ..................... -50mA
DC Output Diode Current, I
OK
(V
OUT
< -0.5V) ............... -50mA
DC Output Current, I
OUT
.............................................. ±50mA
DC V
CC
or Ground Current, I
CC
or I
GND
........................ ±50mA
Junction Temperature ................................................. +150℃
Storage Temperature Range ........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................ +260℃
ESD Susceptibility
HBM ............................................................................. 8000V
MM ................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ..................... -40℃ to +125℃
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure
to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section
is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure
to observe proper handling
and installation procedures
can cause damage. ESD damage can range from subtle
performance
degradation to
complete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit
design, or specifications
without prior notice.