Features and Benefits
5°C
40°C
12 to 72 hours at 25°C
Full Cure Conditions
25%
Specific Heat
0.3 kJ/kgK
3 hrs
7 min
8 min
2 to 72 hrs
Cure Speed At Various Temperatures
% of Room Temperature Strength
Storage Condition
8 to 28°C
Handling Strength
Set Time on Steel
12 to 72 hours
Gap Fill
6 hrs
24 to 72 hrs
Shear Strength
Solubility
Functional Strength
50%
100%
Tensile Strength
Pressure Resistance
1.11
Cured Material Properties
Service Temperature
-55ºC to 150ºC
Breakaway Torque
Prevailing Torque
Coefficient of Thermal Expansion
ASTM D696
Thermal Conductivity
0.1 W/mK
ASTM C177
Pin/Collar Shear Strength
ISO 10123
22 to 40 N-m
Breakloose Torque
80 ppm/K
Uncured Material Characteristics
Flash Point
> 93°C
Shelf Life
12 months unopened
Viscosity
1400 cPs
Brookfield RVT at 25°C, Spindle 3, 20 rpm
Specific Gravity
Technology / Base
Urethane Methacrylate
Physical Property
Value
Condition/Method
Technical Data
Appearance / Color
Green
Consistency
Liquid
● Green Anaerobic Retaining Compound and Sealant
● High Strength
● Fluorescent UV Indicator
● Excellent Gap and Void Filling Capability
● High Resistance to Heat, Corrosion, Vibrations, Water, Gases, Oils, Hydrocarbons, and Many Chemicals
80RC is a fast curing high strength anaerobic adhesive for locking and sealing threads, andretaining of cylindrical parts. Allows
larger machining tolerances. Highly resistant to heat, corrosion,vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Components
One Component
Curing
Anaerobic with Secondary Heat Cure
Type of Product
Retaining Compound Adhesive and Sealant
80RC
Technical Data Sheet
Steel
Aluminum
Zn Dichromate
0.05mm
0.25mm
Hot Strength (%RT strength, tested at temperature)
Specifications
Surfaces to be bonded should be clean and dry and free of grease.
Product should be applied in enough quantity to fill all engaged
threads or gap. The product performs best in thin bond gaps. Very
large gaps may create gaps that will affect the cure speed and overall
strength. Good contact is essential. It is recommended to confirm
compatibility of the product with all substrates prior to use. This
product is not recommended for use with strong oxidizing materials.
Where aqueous washing systems are used to clean the surfaces
before bonding, these aqueous washes can affect the cure and
performance of the adhesive. This product is not normally
recommended for use on plastics, users must check compatibility of
the product with such substrates.
125°C
22°C
22°C
1000 hours measured at room conditions
90%
1000 hours measured at room conditions
100%
1000 hours measured at room conditions
Motor Oil
1000 hours measured at room conditions
85%
1000 hours measured at room conditions
87°C
22°C
General Instructions
Brake Fluid
Acetone
80%
80%
Chemical Resistance Testing
% of Room Temperature Strength
Condition
Test Temperature
50% Water/50% Glycol
Unleaded Gasoline
Technical Data
Physical Property
Value
Condition/Method
40 hrs
70 hrs
50%
100%
28 min
Cure Speed For Various Gap Sizes
% of Room Temperature Strength
25%
35 min
10 to 72 hrs
34 min
18 to 72 hrs
% of Room Temperature Strength
1000 hrs at 150°C
Heat Aging Testing
Cure Speed On Various Substrates
25%
50%
100%
100%
Room Temperature Strength
34 min
18 to 72 hrs
15 hrs
22 min
2 hrs
22 min
1000 hrs at 120°C
100%
Room Temperature Strength
NOTE TO USER: by ordering/receiving product you accept the H.B. Fuller General Terms and Conditions of Sale applicable in the region. Please request a copy if you have not
received these. These Terms and Conditions contain disclaimers of implied warranties (including but not limited to disclaiming warranties of fitness for a particular purpose) and limits
of liability. All other terms are rejected. In any event, the total aggregate liability of H.B. Fuller for any claim or series of related claims however arising, in contract, tort (including
negligence), breach of statutory duty, misrepresentation, strict liability or otherwise, is limited to replacement of affected products or refund of the purchase price for affected
products. H.B. Fuller shall not be liable for loss of profit, loss of margin, loss of contract, loss of business, loss of goodwill or any indirect or consequential losses arising
out of or in connection with product supply.
H.B. Fuller
www.hbfuller.com
©H.B. Fuller Company, 2020
IMPORTANT: Information, specifications, procedures and recommendations provided (“information”) are based on our experience, and we believe this information to be accurate. No
representation, guarantee or warranty is made as to the accuracy or completeness of the information or that use of the product will avoid losses or damages or give desired results. It
is purchaser’s sole responsibility to test and determine the suitability of any product for the intended use. Tests should be repeated if materials or conditions change in any way. No
employee, distributor or agent has any right to change these facts and offer a guarantee of performance.
® and ™ are trademarks of H.B. Fuller Company or one of its affiliated entities.
Technical Data Sheet
0%
20%
40%
60%
80%
100%
120%
-25°C 0°C 25°C 50°C 100°C 130°C 150°C 200°C
Precent of RT Full Strength
Testing Temperature